Re: Online resizing of LUN's

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 06/22/2012 09:56 AM, FUJITA Tomonori wrote:
On Fri, 22 Jun 2012 08:32:16 +0200
RedShift<redshift@xxxxxxxxxx>  wrote:

On 06/18/2012 03:21 PM, FUJITA Tomonori wrote:
On Mon, 18 Jun 2012 15:12:37 +0200 (CEST)
RedShift<redshift@xxxxxxxxxx>   wrote:

So the patch in the email posted above should work? Will try that ASAP.

Not sure. Too many changes since then. The following patch can be
applied to the current git head. But not sure if it works.
*snip*


It doesn't work.

I use an LVM logical volume as backing-store to my iSCSI target. I started tgtd, connected my initiator and then proceeded with resizing my logical volume by adding 5 GB. Next, I rescanned the disks from disk management (I'm using Windows as initiator), however, no size changed occured nor does tgtd say so.

I ran tgtd -f -d 1, and it says

# tgtd -d 1 -f
tgtd: setup_inotify(320) inotify ready, 0


But it never mentions "%s changed"


I modified the patch so it would apply cleanly to 1.0.28, below

The patch is corrupted. The tabs are converted to spaces.

Can you resend an updated patch?
--
To unsubscribe from this list: send the line "unsubscribe stgt" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


Sorry, I always write my code using spaces, didn't notice you used tabs. I replaced the spaces with tabs in this one:



Only in fujita-tgt-5e053ca-with-resize/doc: htmlpages
Only in fujita-tgt-5e053ca-with-resize/doc: manpages
diff -r -u fujita-tgt-5e053ca/usr/bs.c fujita-tgt-5e053ca-with-resize/usr/bs.c
--- fujita-tgt-5e053ca/usr/bs.c	2012-06-02 16:04:54.000000000 +0200
+++ fujita-tgt-5e053ca-with-resize/usr/bs.c	2012-06-21 20:03:19.059142000 +0200
@@ -32,6 +32,7 @@
 #include <sys/types.h>
 #include <sys/epoll.h>
 #include <linux/types.h>
+#include <sys/inotify.h>

 #include "list.h"
 #include "tgtd.h"
@@ -304,6 +305,22 @@
 	return 1;
 }

+extern void resize_detect(int fd, int events, void *data);
+
+void setup_inotify(void)
+{
+	int ret;
+
+	inotify_fd = inotify_init1(IN_NONBLOCK);
+	if (inotify_fd < 0)
+		eprintf("lun size change detection is disabled\n");
+	else {
+		ret = tgt_event_add(inotify_fd, EPOLLIN,
+			resize_detect, NULL);
+		eprintf("inotify ready, %d\n", ret);
+	}
+}
+
 int bs_init(void)
 {
 	int ret;
@@ -311,12 +328,14 @@
 	ret = bs_init_signalfd();
 	if (!ret) {
 		eprintf("use signalfd notification\n");
+		setup_inotify();
 		return 0;
 	}

 	ret = bs_init_notify_thread();
 	if (!ret) {
 		eprintf("use pthread notification\n");
+		setup_inotify();
 		return 0;
 	}

diff -r -u fujita-tgt-5e053ca/usr/bs_rdwr.c fujita-tgt-5e053ca-with-resize/usr/bs_rdwr.c
--- fujita-tgt-5e053ca/usr/bs_rdwr.c	2012-06-02 16:04:54.000000000 +0200
+++ fujita-tgt-5e053ca-with-resize/usr/bs_rdwr.c	2012-06-21 20:04:42.105141000 +0200
@@ -33,6 +33,7 @@

 #include <linux/fs.h>
 #include <sys/epoll.h>
+#include <sys/inotify.h>

 #include "list.h"
 #include "util.h"
@@ -269,6 +270,7 @@
 static int bs_rdwr_open(struct scsi_lu *lu, char *path, int *fd, uint64_t *size)
 {
 	uint32_t blksize = 0;
+	int ret;

 	*fd = backed_file_open(path, O_RDWR|O_LARGEFILE|lu->bsoflags, size,
 				&blksize);
@@ -284,6 +286,17 @@
 	if (!lu->attrs.no_auto_lbppbe)
 		update_lbppbe(lu, blksize);

+	if (inotify_fd > 0) {
+		ret = inotify_add_watch(inotify_fd, path, IN_CLOSE_WRITE);
+		if (ret < 0)
+			eprintf("can't check %s\n", path);
+		else {
+			eprintf("checking %s\n", path);
+			lu->notify_fd = ret;
+		}
+	}
+
+
 	return 0;
 }

diff -r -u fujita-tgt-5e053ca/usr/target.c fujita-tgt-5e053ca-with-resize/usr/target.c
--- fujita-tgt-5e053ca/usr/target.c	2012-06-02 16:04:54.000000000 +0200
+++ fujita-tgt-5e053ca-with-resize/usr/target.c	2012-06-21 20:14:00.275112000 +0200
@@ -29,6 +29,7 @@
 #include <unistd.h>
 #include <sys/socket.h>
 #include <sys/time.h>
+#include <sys/inotify.h>

 #include "list.h"
 #include "util.h"
@@ -41,6 +42,39 @@
 #include "spc.h"

 static LIST_HEAD(device_type_list);
+static LIST_HEAD(target_list);
+
+void resize_detect(int fd, int events, void *data)
+{
+	struct target *target;
+	struct scsi_lu *lu;
+	struct inotify_event e;
+	int ret;
+
+	ret = read(fd, (char *)&e, sizeof(e));
+
+	eprintf("resize, %d\n", ret);
+	if (ret < 0)
+		return;
+
+	list_for_each_entry(target, &target_list, target_siblings) {
+		list_for_each_entry(lu, &target->device_list, device_siblings) {
+			if (lu->notify_fd == e.wd) {
+				uint64_t size;
+				uint32_t blksize = 0;
+				int fd;
+				eprintf("%s changed\n", lu->path);
+				fd = backed_file_open(lu->path, O_RDONLY, &size, &blksize);
+				if (fd > 0) {
+					eprintf("new size %lld\n", (long long)size);
+					close(fd);
+					lu->size = size;
+				} else
+					eprintf("failed to open\n");
+				}
+		}
+	}
+}

 static struct target global_target;

@@ -61,7 +95,7 @@
 	return NULL;
 }

-static LIST_HEAD(target_list);
+

 static struct target *target_lookup(int tid)
 {
diff -r -u fujita-tgt-5e053ca/usr/tgtd.c fujita-tgt-5e053ca-with-resize/usr/tgtd.c
--- fujita-tgt-5e053ca/usr/tgtd.c	2012-06-02 16:04:54.000000000 +0200
+++ fujita-tgt-5e053ca-with-resize/usr/tgtd.c	2012-06-21 20:08:03.391241000 +0200
@@ -45,6 +45,7 @@
 unsigned long pagesize, pageshift;

 int system_active = 1;
+int inotify_fd = -1;
 static int ep_fd;
 static char program_name[] = "tgtd";
 static LIST_HEAD(tgt_events_list);
diff -r -u fujita-tgt-5e053ca/usr/tgtd.h fujita-tgt-5e053ca-with-resize/usr/tgtd.h
--- fujita-tgt-5e053ca/usr/tgtd.h	2012-06-02 16:04:54.000000000 +0200
+++ fujita-tgt-5e053ca-with-resize/usr/tgtd.h	2012-06-21 20:09:59.438105000 +0200
@@ -168,6 +168,7 @@
 	uint64_t size;
 	uint64_t lun;
 	char *path;
+	int notify_fd;
 	int bsoflags;
 	unsigned int blk_shift;

@@ -226,6 +227,7 @@

 extern int system_active;
 extern int is_debug;
+extern int inotify_fd;
 extern int nr_iothreads;
 extern struct list_head bst_list;


--
To unsubscribe from this list: send the line "unsubscribe stgt" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SCSI]     [Linux RAID]     [Linux Clusters]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]

  Powered by Linux