[PATCH] staging: rtl8723bs: add spaces arround operators

[Guillaume Lefèvre-Crimé <guillaume.lefevre.crime@xxxxxxx>]

Adhere to Linux kernel coding style.
Reported by checkpath :
CHECK: spaces preferred around that '&' (ctx:VxV)

Signed-off-by: Guillaume Lefèvre-Crimé <guillaume.lefevre.crime@xxxxxxx>
---
 drivers/staging/rtl8723bs/core/rtw_efuse.c | 54 +++++++++++-----------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/drivers/staging/rtl8723bs/core/rtw_efuse.c b/drivers/staging/rtl8723bs/core/rtw_efuse.c
index eb848f9bbf2c..89acb6f290cc 100644
--- a/drivers/staging/rtl8723bs/core/rtw_efuse.c
+++ b/drivers/staging/rtl8723bs/core/rtw_efuse.c
@@ -38,7 +38,7 @@ Efuse_Read1ByteFromFakeContent(u16 Offset, u8 *Value)
 	if (fakeEfuseBank == 0)
 		*Value = fakeEfuseContent[Offset];
 	else
-		*Value = fakeBTEfuseContent[fakeEfuseBank-1][Offset];
+		*Value = fakeBTEfuseContent[fakeEfuseBank - 1][Offset];
 	return true;
 }
 
@@ -50,7 +50,7 @@ Efuse_Write1ByteToFakeContent(u16 Offset, u8 Value)
 	if (fakeEfuseBank == 0)
 		fakeEfuseContent[Offset] = Value;
 	else
-		fakeBTEfuseContent[fakeEfuseBank-1][Offset] = Value;
+		fakeBTEfuseContent[fakeEfuseBank - 1][Offset] = Value;
 	return true;
 }
 
@@ -206,21 +206,21 @@ u16		Address)
 	if (Address < contentLen) {/* E-fuse 512Byte */
 		/* Write E-fuse Register address bit0~7 */
 		temp = Address & 0xFF;
-		rtw_write8(Adapter, EFUSE_CTRL+1, temp);
-		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+2);
+		rtw_write8(Adapter, EFUSE_CTRL + 1, temp);
+		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL + 2);
 		/* Write E-fuse Register address bit8~9 */
 		temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC);
-		rtw_write8(Adapter, EFUSE_CTRL+2, temp);
+		rtw_write8(Adapter, EFUSE_CTRL + 2, temp);
 
 		/* Write 0x30[31]= 0 */
-		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
+		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL + 3);
 		temp = Bytetemp & 0x7F;
-		rtw_write8(Adapter, EFUSE_CTRL+3, temp);
+		rtw_write8(Adapter, EFUSE_CTRL + 3, temp);
 
 		/* Wait Write-ready (0x30[31]= 1) */
-		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
+		Bytetemp = rtw_read8(Adapter, EFUSE_CTRL + 3);
 		while (!(Bytetemp & 0x80)) {
-			Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
+			Bytetemp = rtw_read8(Adapter, EFUSE_CTRL + 3);
 			k++;
 			if (k == 1000)
 				break;
@@ -253,16 +253,16 @@ bool		bPseudoTest)
 
 	/*  -----------------e-fuse reg ctrl --------------------------------- */
 	/* address */
-	rtw_write8(padapter, EFUSE_CTRL+1, (u8)(addr&0xff));
-	rtw_write8(padapter, EFUSE_CTRL+2, ((u8)((addr>>8) & 0x03)) |
-	(rtw_read8(padapter, EFUSE_CTRL+2)&0xFC));
+	rtw_write8(padapter, EFUSE_CTRL + 1, (u8)(addr & 0xff));
+	rtw_write8(padapter, EFUSE_CTRL + 2, ((u8)((addr >> 8) & 0x03)) |
+	(rtw_read8(padapter, EFUSE_CTRL + 2) & 0xFC));
 
 	/* rtw_write8(padapter, EFUSE_CTRL+3,  0x72); read cmd */
 	/* Write bit 32 0 */
-	readbyte = rtw_read8(padapter, EFUSE_CTRL+3);
-	rtw_write8(padapter, EFUSE_CTRL+3, (readbyte & 0x7f));
+	readbyte = rtw_read8(padapter, EFUSE_CTRL + 3);
+	rtw_write8(padapter, EFUSE_CTRL + 3, (readbyte & 0x7f));
 
-	while (!(0x80 & rtw_read8(padapter, EFUSE_CTRL+3)) && (tmpidx < 1000)) {
+	while (!(0x80 & rtw_read8(padapter, EFUSE_CTRL + 3)) && (tmpidx < 1000)) {
 		mdelay(1);
 		tmpidx++;
 	}
@@ -293,9 +293,9 @@ u8 efuse_OneByteWrite(struct adapter *padapter, u16 addr, u8 data, bool bPseudoT
 
 
 	efuseValue = rtw_read32(padapter, EFUSE_CTRL);
-	efuseValue |= (BIT21|BIT31);
+	efuseValue |= (BIT21 | BIT31);
 	efuseValue &= ~(0x3FFFF);
-	efuseValue |= ((addr<<8 | data) & 0x3FFFF);
+	efuseValue |= ((addr << 8 | data) & 0x3FFFF);
 
 
 	/*  <20130227, Kordan> 8192E MP chip A-cut had better not set 0x34[11] until B-Cut. */
@@ -304,9 +304,9 @@ u8 efuse_OneByteWrite(struct adapter *padapter, u16 addr, u8 data, bool bPseudoT
 	/* 0x34[11]: SW force PGMEN input of efuse to high. (for the bank selected by 0x34[9:8]) */
 	/* PHY_SetMacReg(padapter, 0x34, BIT11, 1); */
 	rtw_write16(padapter, 0x34, rtw_read16(padapter, 0x34) | (BIT11));
-	rtw_write32(padapter, EFUSE_CTRL, 0x90600000|((addr<<8 | data)));
+	rtw_write32(padapter, EFUSE_CTRL, 0x90600000 | ((addr << 8 | data)));
 
-	while ((0x80 &  rtw_read8(padapter, EFUSE_CTRL+3)) && (tmpidx < 100)) {
+	while ((0x80 &  rtw_read8(padapter, EFUSE_CTRL + 3)) && (tmpidx < 100)) {
 		mdelay(1);
 		tmpidx++;
 	}
@@ -365,19 +365,19 @@ efuse_WordEnableDataRead(u8 word_en,
 						u8 *sourdata,
 						u8 *targetdata)
 {
-	if (!(word_en&BIT(0))) {
+	if (!(word_en & BIT(0))) {
 		targetdata[0] = sourdata[0];
 		targetdata[1] = sourdata[1];
 	}
-	if (!(word_en&BIT(1))) {
+	if (!(word_en & BIT(1))) {
 		targetdata[2] = sourdata[2];
 		targetdata[3] = sourdata[3];
 	}
-	if (!(word_en&BIT(2))) {
+	if (!(word_en & BIT(2))) {
 		targetdata[4] = sourdata[4];
 		targetdata[5] = sourdata[5];
 	}
-	if (!(word_en&BIT(3))) {
+	if (!(word_en & BIT(3))) {
 		targetdata[6] = sourdata[6];
 		targetdata[7] = sourdata[7];
 	}
@@ -463,7 +463,7 @@ static void efuse_ShadowRead2Byte(struct adapter *padapter, u16 Offset, u16 *Val
 	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
 
 	*Value = pEEPROM->efuse_eeprom_data[Offset];
-	*Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8;
+	*Value |= pEEPROM->efuse_eeprom_data[Offset + 1] << 8;
 
 }	/*  EFUSE_ShadowRead2Byte */
 
@@ -473,9 +473,9 @@ static void efuse_ShadowRead4Byte(struct adapter *padapter, u16 Offset, u32 *Val
 	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
 
 	*Value = pEEPROM->efuse_eeprom_data[Offset];
-	*Value |= pEEPROM->efuse_eeprom_data[Offset+1]<<8;
-	*Value |= pEEPROM->efuse_eeprom_data[Offset+2]<<16;
-	*Value |= pEEPROM->efuse_eeprom_data[Offset+3]<<24;
+	*Value |= pEEPROM->efuse_eeprom_data[Offset + 1] << 8;
+	*Value |= pEEPROM->efuse_eeprom_data[Offset + 2] << 16;
+	*Value |= pEEPROM->efuse_eeprom_data[Offset + 3] << 24;
 
 }	/*  efuse_ShadowRead4Byte */
 
-- 
2.46.0