Re: [PATCH v2 4/4] arm64: dts: rockchip: Add rkvdec2 Video Decoder on rk3588(s)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Am 19.06.24 um 17:28 schrieb Jonas Karlman:
Hi Detlev,

On 2024-06-19 16:57, Detlev Casanova wrote:
Add the rkvdec2 Video Decoder to the RK3588s devicetree.

Signed-off-by: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
---
  arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 50 +++++++++++++++++++++++
  1 file changed, 50 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 6ac5ac8b48ab..7690632f57f1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -2596,6 +2596,16 @@ system_sram2: sram@ff001000 {
  		ranges = <0x0 0x0 0xff001000 0xef000>;
  		#address-cells = <1>;
  		#size-cells = <1>;
+
+		vdec0_sram: rkvdec-sram@0 {
+			reg = <0x0 0x78000>;
+			pool;
+		};
+
+		vdec1_sram: rkvdec-sram@1 {
+			reg = <0x78000 0x77000>;
+			pool;
+		};
  	};
pinctrl: pinctrl {
@@ -2665,6 +2675,46 @@ gpio4: gpio@fec50000 {
  			#interrupt-cells = <2>;
  		};
  	};
+
+	vdec0: video-decoder@fdc38100 {
+		compatible = "rockchip,rk3588-vdec";
+		reg = <0x0 0xfdc38100 0x0 0x500>;
+		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_RKVDEC0>, <&cru HCLK_RKVDEC0>, <&cru CLK_RKVDEC0_CA>,
+			 <&cru CLK_RKVDEC0_CORE>, <&cru CLK_RKVDEC0_HEVC_CA>;
+		clock-names = "axi", "ahb", "cabac", "core", "hevc_cabac";
+		assigned-clocks = <&cru ACLK_RKVDEC0>, <&cru CLK_RKVDEC0_CORE>,
+				  <&cru CLK_RKVDEC0_CA>, <&cru CLK_RKVDEC0_HEVC_CA>;
+		assigned-clock-rates = <800000000>, <600000000>,
+				       <600000000>, <1000000000>;
+		resets = <&cru SRST_A_RKVDEC0>, <&cru SRST_H_RKVDEC0>, <&cru SRST_RKVDEC0_CA>,
+			 <&cru SRST_RKVDEC0_CORE>, <&cru SRST_RKVDEC0_HEVC_CA>;
+		reset-names = "rst_axi", "rst_ahb", "rst_cabac",
+			      "rst_core", "rst_hevc_cabac";
+		power-domains = <&power RK3588_PD_RKVDEC0>;
+		sram = <&vdec0_sram>;
+		status = "okay";
+	};
+
+	vdec1: video-decoder@fdc40100 {
+		compatible = "rockchip,rk3588-vdec";
+		reg = <0x0 0xfdc40100 0x0 0x500>;
+		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_RKVDEC1>, <&cru HCLK_RKVDEC1>, <&cru CLK_RKVDEC1_CA>,
+			 <&cru CLK_RKVDEC1_CORE>, <&cru CLK_RKVDEC1_HEVC_CA>;
+		clock-names = "axi", "ahb", "cabac", "core", "hevc_cabac";
+		assigned-clocks = <&cru ACLK_RKVDEC1>, <&cru CLK_RKVDEC1_CORE>,
+				  <&cru CLK_RKVDEC1_CA>, <&cru CLK_RKVDEC1_HEVC_CA>;
+		assigned-clock-rates = <800000000>, <600000000>,
+				       <600000000>, <1000000000>;
+		resets = <&cru SRST_A_RKVDEC1>, <&cru SRST_H_RKVDEC1>, <&cru SRST_RKVDEC1_CA>,
+			 <&cru SRST_RKVDEC1_CORE>, <&cru SRST_RKVDEC1_HEVC_CA>;
+		reset-names = "rst_axi", "rst_ahb", "rst_cabac",
+			      "rst_core", "rst_hevc_cabac";
+		power-domains = <&power RK3588_PD_RKVDEC1>;
+		sram = <&vdec1_sram>;
+		status = "okay";
+	};
This is still missing the iommus, please add the iommus, they should be
supported/same as the one used for e.g. VOP2:

   compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";

The VOP2 MMUs does have one extra mmu_cfg_mode flag in AUTO_GATING,
compared to the VDPU381 MMUs, however only the AV1D MMU should be
special on RK3588.

Please add the iommus :-)
When looking add the vendor DT/iommu driver I'm seeing serval quirks
applied for vdec's iommus. Since it's rightly frowned upon adding such
boolean-quirk-properties to upstream devicetrees, we'd at least need
additional (fallback-) compatibles, even if it works with the iommu driver
as is (what I doubt, but haven't tested). We need to be able to apply those
quirks later without changing the devicetree (as usual) and I'm sure RK
devs haven't added these quirks for the personal amusement. If Detlev says
iommu is out of scope for this series (which is valid), I'd say it's fine
to leave them out for now (as no binding exists) and the HW works
(obviously) fine without them.

Regards,
Jonas

  };
#include "rk3588s-pinctrl.dtsi"




[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux