Re: [PATCH v2 4/4] arm64: dts: rockchip: Add rkvdec2 Video Decoder on rk3588(s)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Mittwoch, 19. Juni 2024, 16:57:21 CEST schrieb Detlev Casanova:
> Add the rkvdec2 Video Decoder to the RK3588s devicetree.
> 
> Signed-off-by: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 50 +++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> index 6ac5ac8b48ab..7690632f57f1 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
> @@ -2596,6 +2596,16 @@ system_sram2: sram@ff001000 {
>  		ranges = <0x0 0x0 0xff001000 0xef000>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> +
> +		vdec0_sram: rkvdec-sram@0 {
> +			reg = <0x0 0x78000>;
> +			pool;
> +		};
> +
> +		vdec1_sram: rkvdec-sram@1 {
> +			reg = <0x78000 0x77000>;
> +			pool;
> +		};
>  	};
>  
>  	pinctrl: pinctrl {
> @@ -2665,6 +2675,46 @@ gpio4: gpio@fec50000 {
>  			#interrupt-cells = <2>;
>  		};
>  	};
> +
> +	vdec0: video-decoder@fdc38100 {
> +		compatible = "rockchip,rk3588-vdec";
> +		reg = <0x0 0xfdc38100 0x0 0x500>;
> +		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH 0>;
> +		clocks = <&cru ACLK_RKVDEC0>, <&cru HCLK_RKVDEC0>, <&cru CLK_RKVDEC0_CA>,
> +			 <&cru CLK_RKVDEC0_CORE>, <&cru CLK_RKVDEC0_HEVC_CA>;
> +		clock-names = "axi", "ahb", "cabac", "core", "hevc_cabac";
> +		assigned-clocks = <&cru ACLK_RKVDEC0>, <&cru CLK_RKVDEC0_CORE>,
> +				  <&cru CLK_RKVDEC0_CA>, <&cru CLK_RKVDEC0_HEVC_CA>;
> +		assigned-clock-rates = <800000000>, <600000000>,
> +				       <600000000>, <1000000000>;
> +		resets = <&cru SRST_A_RKVDEC0>, <&cru SRST_H_RKVDEC0>, <&cru SRST_RKVDEC0_CA>,
> +			 <&cru SRST_RKVDEC0_CORE>, <&cru SRST_RKVDEC0_HEVC_CA>;
> +		reset-names = "rst_axi", "rst_ahb", "rst_cabac",
> +			      "rst_core", "rst_hevc_cabac";
> +		power-domains = <&power RK3588_PD_RKVDEC0>;
> +		sram = <&vdec0_sram>;
> +		status = "okay";

okay is the default status, so is not needed when the node is always-on

> +	};
> +
> +	vdec1: video-decoder@fdc40100 {
> +		compatible = "rockchip,rk3588-vdec";
> +		reg = <0x0 0xfdc40100 0x0 0x500>;
> +		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
> +		clocks = <&cru ACLK_RKVDEC1>, <&cru HCLK_RKVDEC1>, <&cru CLK_RKVDEC1_CA>,
> +			 <&cru CLK_RKVDEC1_CORE>, <&cru CLK_RKVDEC1_HEVC_CA>;
> +		clock-names = "axi", "ahb", "cabac", "core", "hevc_cabac";
> +		assigned-clocks = <&cru ACLK_RKVDEC1>, <&cru CLK_RKVDEC1_CORE>,
> +				  <&cru CLK_RKVDEC1_CA>, <&cru CLK_RKVDEC1_HEVC_CA>;
> +		assigned-clock-rates = <800000000>, <600000000>,
> +				       <600000000>, <1000000000>;
> +		resets = <&cru SRST_A_RKVDEC1>, <&cru SRST_H_RKVDEC1>, <&cru SRST_RKVDEC1_CA>,
> +			 <&cru SRST_RKVDEC1_CORE>, <&cru SRST_RKVDEC1_HEVC_CA>;
> +		reset-names = "rst_axi", "rst_ahb", "rst_cabac",
> +			      "rst_core", "rst_hevc_cabac";
> +		power-domains = <&power RK3588_PD_RKVDEC1>;
> +		sram = <&vdec1_sram>;
> +		status = "okay";

same

> +	};
>  };
>  
>  #include "rk3588s-pinctrl.dtsi"
> 








[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux