On Mon, Jan 23, 2023 at 01:51:50PM +0100, Hans de Goede wrote:
> Remove a bunch of unused data-types and defines from ov2680.h.
Good patch!
Reviewed-by: Andy Shevchenko <andy@xxxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> drivers/staging/media/atomisp/i2c/ov2680.h | 60 ----------------------
> 1 file changed, 60 deletions(-)
>
> diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
> index 20ef59928cb1..189d1b2b7584 100644
> --- a/drivers/staging/media/atomisp/i2c/ov2680.h
> +++ b/drivers/staging/media/atomisp/i2c/ov2680.h
> @@ -46,45 +46,11 @@
>
> #define OV2680_FOCAL_LENGTH_NUM 334 /*3.34mm*/
>
> -#define OV2680_BIN_FACTOR_MAX 4
> -
> #define MAX_FMTS 1
>
> -/* sensor_mode_data read_mode adaptation */
> -#define OV2680_READ_MODE_BINNING_ON 0x0400
> -#define OV2680_READ_MODE_BINNING_OFF 0x00
> #define OV2680_INTEGRATION_TIME_MARGIN 8
> -
> -#define OV2680_MAX_EXPOSURE_VALUE 0xFFF1
> -#define OV2680_MAX_GAIN_VALUE 0xFF
> -
> -/*
> - * focal length bits definition:
> - * bits 31-16: numerator, bits 15-0: denominator
> - */
> -#define OV2680_FOCAL_LENGTH_DEFAULT 0x1B70064
> -
> -/*
> - * current f-number bits definition:
> - * bits 31-16: numerator, bits 15-0: denominator
> - */
> -#define OV2680_F_NUMBER_DEFAULT 0x18000a
> -
> -/*
> - * f-number range bits definition:
> - * bits 31-24: max f-number numerator
> - * bits 23-16: max f-number denominator
> - * bits 15-8: min f-number numerator
> - * bits 7-0: min f-number denominator
> - */
> -#define OV2680_F_NUMBER_RANGE 0x180a180a
> #define OV2680_ID 0x2680
>
> -#define OV2680_FINE_INTG_TIME_MIN 0
> -#define OV2680_FINE_INTG_TIME_MAX_MARGIN 0
> -#define OV2680_COARSE_INTG_TIME_MIN 1
> -#define OV2680_COARSE_INTG_TIME_MAX_MARGIN 6
> -
> /*
> * OV2680 System control registers
> */
> @@ -147,19 +113,6 @@
> #define OV2680_START_STREAMING 0x01
> #define OV2680_STOP_STREAMING 0x00
>
> -#define OV2680_INVALID_CONFIG 0xffffffff
> -
> -struct regval_list {
> - u16 reg_num;
> - u8 value;
> -};
> -
> -struct ov2680_format {
> - u8 *desc;
> - u32 pixelformat;
> - struct ov2680_reg *regs;
> -};
> -
> /*
> * ov2680 device structure.
> */
> @@ -216,18 +169,6 @@ static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
> ctrls.handler)->sd;
> }
>
> -#define OV2680_MAX_WRITE_BUF_SIZE 30
> -
> -struct ov2680_write_buffer {
> - u16 addr;
> - u8 data[OV2680_MAX_WRITE_BUF_SIZE];
> -};
> -
> -struct ov2680_write_ctrl {
> - int index;
> - struct ov2680_write_buffer buffer;
> -};
> -
> static struct ov2680_reg const ov2680_global_setting[] = {
> {0x0103, 0x01},
> {0x3002, 0x00},
> @@ -304,7 +245,6 @@ static struct ov2680_reg const ov2680_global_setting[] = {
> {0x5793, 0x00},
> {0x5794, 0x03}, //based OV2680_R1A_AM10.ovt,Adjust DPC setting (57xx) on 14/06/13
> {0x0100, 0x00}, //stream off
> -
> {}
> };
>
> --
> 2.39.0
>
--
With Best Regards,
Andy Shevchenko
