Re: [PATCH 4/4] riscv: dts: allwinner: d1: Add video engine node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Paul,

On 1/5/23 04:11, Paul Kocialkowski wrote:
> On Sat 31 Dec 22, 10:46, Samuel Holland wrote:
>> D1 contains a video engine which is supported by the Cedrus driver.
> 
> Does it work "outside the box" without power domain management?
> If not, it might be a bit confusing to add the node at this point.

Yes, it does. All of the power domains are enabled by default. However,
if the PPU series is merged first, I will respin this to include the
power-domains property from the beginning.

Regards,
Samuel

>> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
>> ---
>>
>>  arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 11 +++++++++++
>>  1 file changed, 11 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
>> index dff363a3c934..4bd374279155 100644
>> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
>> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
>> @@ -34,6 +34,17 @@ soc {
>>  		#address-cells = <1>;
>>  		#size-cells = <1>;
>>  
>> +		ve: video-codec@1c0e000 {
>> +			compatible = "allwinner,sun20i-d1-video-engine";
>> +			reg = <0x1c0e000 0x2000>;
>> +			interrupts = <SOC_PERIPHERAL_IRQ(66) IRQ_TYPE_LEVEL_HIGH>;
>> +			clocks = <&ccu CLK_BUS_VE>,
>> +				 <&ccu CLK_VE>,
>> +				 <&ccu CLK_MBUS_VE>;
>> +			clock-names = "ahb", "mod", "ram";
>> +			resets = <&ccu RST_BUS_VE>;
>> +		};
>> +
>>  		pio: pinctrl@2000000 {
>>  			compatible = "allwinner,sun20i-d1-pinctrl";
>>  			reg = <0x2000000 0x800>;
>> -- 
>> 2.37.4
>>
> 





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux