Re: [PATCH 4/4] riscv: dts: allwinner: d1: Add video engine node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Samuel,

On Sat 31 Dec 22, 10:46, Samuel Holland wrote:
> D1 contains a video engine which is supported by the Cedrus driver.

Does it work "outside the box" without power domain management?
If not, it might be a bit confusing to add the node at this point.

Cheers,

Paul
 
> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
> ---
> 
>  arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> index dff363a3c934..4bd374279155 100644
> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> @@ -34,6 +34,17 @@ soc {
>  		#address-cells = <1>;
>  		#size-cells = <1>;
>  
> +		ve: video-codec@1c0e000 {
> +			compatible = "allwinner,sun20i-d1-video-engine";
> +			reg = <0x1c0e000 0x2000>;
> +			interrupts = <SOC_PERIPHERAL_IRQ(66) IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&ccu CLK_BUS_VE>,
> +				 <&ccu CLK_VE>,
> +				 <&ccu CLK_MBUS_VE>;
> +			clock-names = "ahb", "mod", "ram";
> +			resets = <&ccu RST_BUS_VE>;
> +		};
> +
>  		pio: pinctrl@2000000 {
>  			compatible = "allwinner,sun20i-d1-pinctrl";
>  			reg = <0x2000000 0x800>;
> -- 
> 2.37.4
> 

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux