Re: [PATCH] staging: rtl8192e: fix CamelCase variables

[Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>]

On 9/18/22 13:30, Valentin Vidic wrote:
> Fix checkpatch warnings for variables: LinkCtrlReg, DeviceID,
> RevisionID, IrqLine.
>
> Signed-off-by: Valentin Vidic <vvidic@xxxxxxxxxxxxxxxxxxxxxx>
> ---
>   drivers/staging/rtl8192e/rtl8192e/rtl_pci.c | 26 ++++++++++-----------
>   1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_pci.c b/drivers/staging/rtl8192e/rtl8192e/rtl_pci.c
> index 1d992d5c4e17..7a9a24935da9 100644
> --- a/drivers/staging/rtl8192e/rtl8192e/rtl_pci.c
> +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_pci.c
> @@ -16,11 +16,11 @@ static void _rtl92e_parse_pci_configuration(struct pci_dev *pdev,
>   	struct r8192_priv *priv = (struct r8192_priv *)rtllib_priv(dev);
>   
>   	u8 tmp;
> -	u16 LinkCtrlReg;
> +	u16 link_ctrl_reg;
>   
> -	pcie_capability_read_word(priv->pdev, PCI_EXP_LNKCTL, &LinkCtrlReg);
> +	pcie_capability_read_word(priv->pdev, PCI_EXP_LNKCTL, &link_ctrl_reg);
>   
> -	RT_TRACE(COMP_INIT, "Link Control Register =%x\n", LinkCtrlReg);
> +	RT_TRACE(COMP_INIT, "Link Control Register =%x\n", link_ctrl_reg);
>   
>   	pci_read_config_byte(pdev, 0x98, &tmp);
>   	tmp |= BIT4;
> @@ -33,28 +33,28 @@ static void _rtl92e_parse_pci_configuration(struct pci_dev *pdev,
>   bool rtl92e_check_adapter(struct pci_dev *pdev, struct net_device *dev)
>   {
>   	struct r8192_priv *priv = (struct r8192_priv *)rtllib_priv(dev);
> -	u16 DeviceID;
> -	u8  RevisionID;
> -	u16 IrqLine;
> +	u16 device_id;
> +	u8  revision_id;
> +	u16 irq_line;
>   
> -	DeviceID = pdev->device;
> -	RevisionID = pdev->revision;
> -	pci_read_config_word(pdev, 0x3C, &IrqLine);
> +	device_id = pdev->device;
> +	revision_id = pdev->revision;
> +	pci_read_config_word(pdev, 0x3C, &irq_line);
>   
>   	priv->card_8192 = priv->ops->nic_type;
>   
> -	if (DeviceID == 0x8192) {
> -		switch (RevisionID) {
> +	if (device_id == 0x8192) {
> +		switch (revision_id) {
>   		case HAL_HW_PCI_REVISION_ID_8192PCIE:
>   			dev_info(&pdev->dev,
>   				 "Adapter(8192 PCI-E) is found - DeviceID=%x\n",
> -				 DeviceID);
> +				 device_id);
>   			priv->card_8192 = NIC_8192E;
>   			break;
>   		case HAL_HW_PCI_REVISION_ID_8192SE:
>   			dev_info(&pdev->dev,
>   				 "Adapter(8192SE) is found - DeviceID=%x\n",
> -				 DeviceID);
> +				 device_id);
>   			priv->card_8192 = NIC_8192SE;
>   			break;
>   		default:

The only thing I do not like so much is that the comment with CamelCase 
"DeviceID" is not changed.

Tested-by: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx> # Edimax N150