[PATCH v2 7/7] media: imx: imx-mipi-csis: Add output format

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Due to how pixel components are transmitted on the CSI-2 serial bus
and how they are stored in memory by the CSI-2 receiver, the component
ordering might change and the image formats on the sink and source pads
of the receiver should reflect it.

For RGB24, in example, the component ordering on the wire as described by
the CSI-2 specification matches the BGR888 format, while once stored in
in memory by the CSIS receiver they match the RGB888 format.

Add an additional .output field to struct csis_pix_format to allow
propagating the correct format to the source pad after a format
configuration on the sink.

The change is only relevant for RGB24 but paves the way for further
format translations in future.

Signed-off-by: Jacopo Mondi <jacopo@xxxxxxxxxx>
---
 drivers/media/platform/imx/imx-mipi-csis.c | 29 +++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/imx/imx-mipi-csis.c b/drivers/media/platform/imx/imx-mipi-csis.c
index fdf133f81c5b..128f4180d1e9 100644
--- a/drivers/media/platform/imx/imx-mipi-csis.c
+++ b/drivers/media/platform/imx/imx-mipi-csis.c
@@ -351,6 +351,7 @@ struct csis_pix_format {
 	u32 code;
 	u32 data_type;
 	u8 width;
+	u32 output;
 };
 
 static const struct csis_pix_format mipi_csis_formats[] = {
@@ -359,95 +360,117 @@ static const struct csis_pix_format mipi_csis_formats[] = {
 		.code = MEDIA_BUS_FMT_UYVY8_1X16,
 		.data_type = MIPI_CSI2_DATA_TYPE_YUV422_8,
 		.width = 16,
+		.output = MEDIA_BUS_FMT_UYVY8_1X16,
 	},
 	/* RGB formats. */
 	{
 		.code = MEDIA_BUS_FMT_RGB565_1X16,
 		.data_type = MIPI_CSI2_DATA_TYPE_RGB565,
 		.width = 16,
+		.output = MEDIA_BUS_FMT_RGB565_1X16,
 	},
 	{
 		.code = MEDIA_BUS_FMT_BGR888_1X24,
 		.data_type = MIPI_CSI2_DATA_TYPE_RGB888,
 		.width = 24,
+		.output = MEDIA_BUS_FMT_RGB888_1X24,
 	},
 	/* RAW (Bayer and greyscale) formats. */
 	{
 		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW8,
 		.width = 8,
+		.output = MEDIA_BUS_FMT_SBGGR8_1X8,
 	}, {
 		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW8,
 		.width = 8,
+		.output = MEDIA_BUS_FMT_SGBRG8_1X8,
 	}, {
 		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW8,
 		.width = 8,
+		.output = MEDIA_BUS_FMT_SGRBG8_1X8,
 	}, {
 		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW8,
 		.width = 8,
+		.output = MEDIA_BUS_FMT_SRGGB8_1X8,
 	}, {
 		.code = MEDIA_BUS_FMT_Y8_1X8,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW8,
 		.width = 8,
+		.output = MEDIA_BUS_FMT_Y8_1X8,
 	}, {
 		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW10,
 		.width = 10,
+		.output = MEDIA_BUS_FMT_SBGGR10_1X10,
 	}, {
 		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW10,
 		.width = 10,
+		.output = MEDIA_BUS_FMT_SGBRG10_1X10,
 	}, {
 		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW10,
 		.width = 10,
+		.output = MEDIA_BUS_FMT_SGRBG10_1X10,
 	}, {
 		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW10,
 		.width = 10,
+		.output = MEDIA_BUS_FMT_SRGGB10_1X10,
 	}, {
 		.code = MEDIA_BUS_FMT_Y10_1X10,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW10,
 		.width = 10,
+		.output = MEDIA_BUS_FMT_Y10_1X10,
 	}, {
 		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW12,
 		.width = 12,
+		.output = MEDIA_BUS_FMT_SBGGR12_1X12,
 	}, {
 		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW12,
 		.width = 12,
+		.output = MEDIA_BUS_FMT_SGBRG12_1X12,
 	}, {
 		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW12,
 		.width = 12,
+		.output = MEDIA_BUS_FMT_SGRBG12_1X12,
 	}, {
 		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW12,
 		.width = 12,
+		.output = MEDIA_BUS_FMT_SRGGB12_1X12,
 	}, {
 		.code = MEDIA_BUS_FMT_Y12_1X12,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW12,
 		.width = 12,
+		.output = MEDIA_BUS_FMT_Y12_1X12,
 	}, {
 		.code = MEDIA_BUS_FMT_SBGGR14_1X14,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW14,
 		.width = 14,
+		.output = MEDIA_BUS_FMT_SBGGR14_1X14,
 	}, {
 		.code = MEDIA_BUS_FMT_SGBRG14_1X14,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW14,
 		.width = 14,
+		.output = MEDIA_BUS_FMT_SGBRG14_1X14,
 	}, {
 		.code = MEDIA_BUS_FMT_SGRBG14_1X14,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW14,
 		.width = 14,
+		.output = MEDIA_BUS_FMT_SGRBG14_1X14,
 	}, {
 		.code = MEDIA_BUS_FMT_SRGGB14_1X14,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW14,
 		.width = 14,
+		.output = MEDIA_BUS_FMT_SRGGB14_1X14,
 	}
 };
 
@@ -1090,7 +1113,11 @@ static int mipi_csis_set_fmt(struct v4l2_subdev *sd,
 	/* Propagate the format from sink to source. */
 	fmt = mipi_csis_get_format(state, sd_state, sdformat->which,
 				   CSIS_PAD_SOURCE);
-	*fmt = sdformat->format;
+
+	/* The format on the source pad might change due to unpacking. */
+	fmt->code = csis_fmt->output;
+	fmt->width = sdformat->format.width;
+	fmt->height = sdformat->format.height;
 
 	/* Store the CSIS format descriptor for active formats. */
 	if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-- 
2.35.0





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux