With the Hantro G1 and G2 now setup to run independently, update
the device tree to allow both to operate. This requires the
vpu-blk-ctrl node to be configured. Since vpu-blk-ctrl needs
certain clock enabled to handle the gating of the G1 and G2
fuses, the clock-parents and clock-rates for the various VPU's
to be moved into the pgc_vpu because they cannot get re-parented
once enabled, and the pgc_vpu is the highest in the chain.
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 972766b67a15..5029c121d48b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -711,7 +711,21 @@ pgc_gpu: power-domain@5 {
pgc_vpu: power-domain@6 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_VPU>;
- clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
+ clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
+ <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+ <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+ assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
+ <&clk IMX8MQ_CLK_VPU_G2>,
+ <&clk IMX8MQ_CLK_VPU_BUS>,
+ <&clk IMX8MQ_VPU_PLL_BYPASS>;
+ assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
+ <&clk IMX8MQ_VPU_PLL_OUT>,
+ <&clk IMX8MQ_SYS1_PLL_800M>,
+ <&clk IMX8MQ_VPU_PLL>;
+ assigned-clock-rates = <600000000>,
+ <600000000>,
+ <800000000>,
+ <0>;
};
pgc_disp: power-domain@7 {
@@ -1432,30 +1446,31 @@ usb3_phy1: usb-phy@382f0040 {
status = "disabled";
};
- vpu: video-codec@38300000 {
- compatible = "nxp,imx8mq-vpu";
- reg = <0x38300000 0x10000>,
- <0x38310000 0x10000>,
- <0x38320000 0x10000>;
- reg-names = "g1", "g2", "ctrl";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "g1", "g2";
+ vpu_g1: video-codec@38300000 {
+ compatible = "nxp,imx8mq-vpu-g1";
+ reg = <0x38300000 0x10000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+ power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+ };
+
+ vpu_g2: video-codec@38310000 {
+ compatible = "nxp,imx8mq-vpu-g2";
+ reg = <0x38310000 0x10000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+ power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
+ };
+
+ vpu_blk_ctrl: blk-ctrl@38320000 {
+ compatible = "fsl,imx8mq-vpu-blk-ctrl";
+ reg = <0x38320000 0x100>;
+ power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
+ power-domain-names = "bus", "g1", "g2";
clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
- <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
- <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
- clock-names = "g1", "g2", "bus";
- assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
- <&clk IMX8MQ_CLK_VPU_G2>,
- <&clk IMX8MQ_CLK_VPU_BUS>,
- <&clk IMX8MQ_VPU_PLL_BYPASS>;
- assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
- <&clk IMX8MQ_VPU_PLL_OUT>,
- <&clk IMX8MQ_SYS1_PLL_800M>,
- <&clk IMX8MQ_VPU_PLL>;
- assigned-clock-rates = <600000000>, <600000000>,
- <800000000>, <0>;
- power-domains = <&pgc_vpu>;
+ <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+ clock-names = "g1", "g2";
+ #power-domain-cells = <1>;
};
pcie0: pcie@33800000 {
--
2.32.0
