[PATCH V2 05/10] media: hantro: Allow i.MX8MQ G1 and G2 to run independently

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The VPU in the i.MX8MQ is really the combination of Hantro G1 and
Hantro G2. With the updated vpu-blk-ctrl, the power domains system
can enable and disable them separately as well as pull them out of
reset. This simplifies the code and lets them run independently
while still retaining backwards compatibility with older device
trees for those using G1.

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>

diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index ab2467998d29..e7afda388ee5 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -609,6 +609,7 @@ static const struct of_device_id of_hantro_match[] = {
 #endif
 #ifdef CONFIG_VIDEO_HANTRO_IMX8M
 	{ .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
+	{ .compatible = "nxp,imx8mq-vpu-g1", .data = &imx8mq_vpu_g1_variant },
 	{ .compatible = "nxp,imx8mq-vpu-g2", .data = &imx8mq_vpu_g2_variant },
 #endif
 #ifdef CONFIG_VIDEO_HANTRO_SAMA5D4
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index cff817ca8d22..96b14b43a4af 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -299,6 +299,7 @@ enum hantro_enc_fmt {
 	ROCKCHIP_VPU_ENC_FMT_UYVY422 = 3,
 };
 
+extern const struct hantro_variant imx8mq_vpu_g1_variant;
 extern const struct hantro_variant imx8mq_vpu_g2_variant;
 extern const struct hantro_variant imx8mq_vpu_variant;
 extern const struct hantro_variant px30_vpu_variant;
diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
index 1a43f6fceef9..4925f2a07d4c 100644
--- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
+++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
@@ -223,13 +223,6 @@ static void imx8m_vpu_g1_reset(struct hantro_ctx *ctx)
 	imx8m_soft_reset(vpu, RESET_G1);
 }
 
-static void imx8m_vpu_g2_reset(struct hantro_ctx *ctx)
-{
-	struct hantro_dev *vpu = ctx->dev;
-
-	imx8m_soft_reset(vpu, RESET_G2);
-}
-
 /*
  * Supported codec ops.
  */
@@ -255,17 +248,33 @@ static const struct hantro_codec_ops imx8mq_vpu_codec_ops[] = {
 	},
 };
 
+static const struct hantro_codec_ops imx8mq_vpu_g1_codec_ops[] = {
+	[HANTRO_MODE_MPEG2_DEC] = {
+		.run = hantro_g1_mpeg2_dec_run,
+		.init = hantro_mpeg2_dec_init,
+		.exit = hantro_mpeg2_dec_exit,
+	},
+	[HANTRO_MODE_VP8_DEC] = {
+		.run = hantro_g1_vp8_dec_run,
+		.init = hantro_vp8_dec_init,
+		.exit = hantro_vp8_dec_exit,
+	},
+	[HANTRO_MODE_H264_DEC] = {
+		.run = hantro_g1_h264_dec_run,
+		.init = hantro_h264_dec_init,
+		.exit = hantro_h264_dec_exit,
+	},
+};
+
 static const struct hantro_codec_ops imx8mq_vpu_g2_codec_ops[] = {
 	[HANTRO_MODE_HEVC_DEC] = {
 		.run = hantro_g2_hevc_dec_run,
-		.reset = imx8m_vpu_g2_reset,
 		.init = hantro_hevc_dec_init,
 		.exit = hantro_hevc_dec_exit,
 	},
 	[HANTRO_MODE_VP9_DEC] = {
 		.run = hantro_g2_vp9_dec_run,
 		.done = hantro_g2_vp9_dec_done,
-		.reset = imx8m_vpu_g2_reset,
 		.init = hantro_vp9_dec_init,
 		.exit = hantro_vp9_dec_exit,
 	},
@@ -285,6 +294,10 @@ static const struct hantro_irq imx8mq_g2_irqs[] = {
 
 static const char * const imx8mq_clk_names[] = { "g1", "g2", "bus" };
 static const char * const imx8mq_reg_names[] = { "g1", "g2", "ctrl" };
+static const char * const imx8mq_g1_clk_names[] = { "g1" };
+static const char * const imx8mq_g1_reg_names[] = { "g1" };
+static const char * const imx8mq_g2_clk_names[] = { "g2" };
+static const char * const imx8mq_g2_reg_names[] = { "g2" };
 
 const struct hantro_variant imx8mq_vpu_variant = {
 	.dec_fmts = imx8m_vpu_dec_fmts,
@@ -305,6 +318,21 @@ const struct hantro_variant imx8mq_vpu_variant = {
 	.num_regs = ARRAY_SIZE(imx8mq_reg_names)
 };
 
+const struct hantro_variant imx8mq_vpu_g1_variant = {
+	.dec_fmts = imx8m_vpu_dec_fmts,
+	.num_dec_fmts = ARRAY_SIZE(imx8m_vpu_dec_fmts),
+	.postproc_fmts = imx8m_vpu_postproc_fmts,
+	.num_postproc_fmts = ARRAY_SIZE(imx8m_vpu_postproc_fmts),
+	.postproc_ops = &hantro_g1_postproc_ops,
+	.codec = HANTRO_MPEG2_DECODER | HANTRO_VP8_DECODER |
+		 HANTRO_H264_DECODER,
+	.codec_ops = imx8mq_vpu_g1_codec_ops,
+	.irqs = imx8mq_irqs,
+	.num_irqs = ARRAY_SIZE(imx8mq_irqs),
+	.clk_names = imx8mq_g1_clk_names,
+	.num_clocks = ARRAY_SIZE(imx8mq_g1_clk_names),
+};
+
 const struct hantro_variant imx8mq_vpu_g2_variant = {
 	.dec_offset = 0x0,
 	.dec_fmts = imx8m_vpu_g2_dec_fmts,
@@ -314,10 +342,8 @@ const struct hantro_variant imx8mq_vpu_g2_variant = {
 	.postproc_ops = &hantro_g2_postproc_ops,
 	.codec = HANTRO_HEVC_DECODER | HANTRO_VP9_DECODER,
 	.codec_ops = imx8mq_vpu_g2_codec_ops,
-	.init = imx8mq_vpu_hw_init,
-	.runtime_resume = imx8mq_runtime_resume,
 	.irqs = imx8mq_g2_irqs,
 	.num_irqs = ARRAY_SIZE(imx8mq_g2_irqs),
-	.clk_names = imx8mq_clk_names,
-	.num_clocks = ARRAY_SIZE(imx8mq_clk_names),
+	.clk_names = imx8mq_g2_clk_names,
+	.num_clocks = ARRAY_SIZE(imx8mq_g2_clk_names),
 };
-- 
2.32.0





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux