Re: [PATCH v2 00/10] staging: media: zoran: fusion in one module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Le Mon, Oct 25, 2021 at 05:13:04PM +0200, Hans Verkuil a écrit :
> On 25/10/2021 16:21, LABBE Corentin wrote:
> > Le Mon, Oct 25, 2021 at 02:45:02PM +0200, Hans Verkuil a écrit :
> >> Hi Corentin,
> >>
> >> On 13/10/2021 20:58, Corentin Labbe wrote:
> >>> Hello
> >>>
> >>> The main change of this serie is to fusion all zoran related modules in
> >>> one.
> >>> This fixes the load order problem when everything is built-in.
> >>>
> >>> Regards
> >>>
> >>> Changes since v1:
> >>> - add missing debugfs cleaning
> >>> - clean some remaining module_get/put functions which made impossible to
> >>>   remove the zoran module
> >>> - added the two latest patchs
> >>
> >> Something weird is wrong with this series. I have a DC30, but loading this with:
> >>
> >> modprobe zr36067 card=3
> >>
> >> results in this error message in the kernel log:
> >>
> >> [   58.645557] zr36067: module is from the staging directory, the quality is unknown, you have been warned.
> >> [   58.646658] zr36067 0000:03:00.0: Zoran MJPEG board driver version 0.10.1
> >> [   58.646793] zr36067 0000:03:00.0: Zoran ZR36057 (rev 1), irq: 18, memory: 0xf4000000
> >> [   58.648821] zr36067 0000:03:00.0: Initializing i2c bus...
> >> [   58.662420] vpx3220 22-0047: vpx3216b found @ 0x8e (DC30[0])
> >> [   58.737445] zr36067 0000:03:00.0: Fail to get encoder
> >>
> >> This works before, so why this is now failing is not clear to me.
> >>
> >> It does work with 'card=0', but I really have a DC30.
> >>
> >> If I test with 'card=0' then the rmmod issue is now solved.
> > 
> > Everything normal, since card 0 does not have encoder.
> > Could you check that adv7175 is compiled ?
> 
> Yes, and it loaded as well (I see it with lsmod).
> 
> However, there is no adv7175 on my board, instead it appears to have an ITT MSE3000.
> There is no driver for this one (and I don't even think it is an i2c device), so
> I suspect that before the driver just continued without encoder support, whereas now
> it fails when it can't load the encoder.
> 
> Could that be the reason? In the absence of an encoder, I think it should just
> continue, esp. since the driver doesn't use the encoder anyway.
> 

So probably the card list is wrong against DC30.
I checked high resolution photo of DC30 on internet, and it confirms the fact that DC30 does not have adv7175.

Since DC30 and DC30+ are identical in the card list, perhaps it is a very old copy/paste error.

So I will add a patch removing adv7175 from DC30.

Thanks for the report
Regards




[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux