Re: [PATCH v2 00/10] staging: media: zoran: fusion in one module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25/10/2021 16:21, LABBE Corentin wrote:
> Le Mon, Oct 25, 2021 at 02:45:02PM +0200, Hans Verkuil a écrit :
>> Hi Corentin,
>>
>> On 13/10/2021 20:58, Corentin Labbe wrote:
>>> Hello
>>>
>>> The main change of this serie is to fusion all zoran related modules in
>>> one.
>>> This fixes the load order problem when everything is built-in.
>>>
>>> Regards
>>>
>>> Changes since v1:
>>> - add missing debugfs cleaning
>>> - clean some remaining module_get/put functions which made impossible to
>>>   remove the zoran module
>>> - added the two latest patchs
>>
>> Something weird is wrong with this series. I have a DC30, but loading this with:
>>
>> modprobe zr36067 card=3
>>
>> results in this error message in the kernel log:
>>
>> [   58.645557] zr36067: module is from the staging directory, the quality is unknown, you have been warned.
>> [   58.646658] zr36067 0000:03:00.0: Zoran MJPEG board driver version 0.10.1
>> [   58.646793] zr36067 0000:03:00.0: Zoran ZR36057 (rev 1), irq: 18, memory: 0xf4000000
>> [   58.648821] zr36067 0000:03:00.0: Initializing i2c bus...
>> [   58.662420] vpx3220 22-0047: vpx3216b found @ 0x8e (DC30[0])
>> [   58.737445] zr36067 0000:03:00.0: Fail to get encoder
>>
>> This works before, so why this is now failing is not clear to me.
>>
>> It does work with 'card=0', but I really have a DC30.
>>
>> If I test with 'card=0' then the rmmod issue is now solved.
> 
> Everything normal, since card 0 does not have encoder.
> Could you check that adv7175 is compiled ?

Yes, and it loaded as well (I see it with lsmod).

However, there is no adv7175 on my board, instead it appears to have an ITT MSE3000.
There is no driver for this one (and I don't even think it is an i2c device), so
I suspect that before the driver just continued without encoder support, whereas now
it fails when it can't load the encoder.

Could that be the reason? In the absence of an encoder, I think it should just
continue, esp. since the driver doesn't use the encoder anyway.

Regards,

	Hans

> 
> I got the same problem with my DC10+ where saa7110 was not compiled.
> This issue was reproduced randomly and I have no explanation. (kconfig problem ?)
> 
> Regards
> 





[Index of Archives]     [Linux Driver Development]     [Linux Driver Backports]     [DMA Engine]     [Linux GPIO]     [Linux SPI]     [Video for Linux]     [Linux USB Devel]     [Linux Coverity]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux