[PATCH] spi: spidev: Align ordering of spidev_spi_ids[] and spidev_dt_ids[]

[Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>]

There is a 1:1 correspondance between the list of spi device-ids and the
devicetree compatibles. The latter is ordered alphabetically by vendor
and device. To simplify keeping the two lists in sync, mention the
vendor in a comment for the spi device-ids and order alphabetically,
too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
---
 drivers/spi/spidev.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 2b87b9ae56c0..58ae4304fdab 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -698,20 +698,24 @@ static const struct class spidev_class = {
 	.name = "spidev",
 };
 
+/*
+ * The spi device ids are expected to match the device names of the
+ * spidev_dt_ids array below. Both arrays are kept in the same ordering.
+ */
 static const struct spi_device_id spidev_spi_ids[] = {
-	{ .name = "bh2228fv" },
-	{ .name = "dh2228fv" },
-	{ .name = "jg10309-01" },
-	{ .name = "ltc2488" },
-	{ .name = "sx1301" },
-	{ .name = "bk4" },
-	{ .name = "bk4-spi" },
-	{ .name = "dhcom-board" },
-	{ .name = "m53cpld" },
-	{ .name = "spi-petra" },
-	{ .name = "spi-authenta" },
-	{ .name = "em3581" },
-	{ .name = "si3210" },
+	{ .name = /* cisco */ "spi-petra" },
+	{ .name = /* dh */ "dhcom-board" },
+	{ .name = /* elgin */ "jg10309-01" },
+	{ .name = /* lineartechnology */ "ltc2488" },
+	{ .name = /* lwn */ "bk4" },
+	{ .name = /* lwn */ "bk4-spi" },
+	{ .name = /* menlo */ "m53cpld" },
+	{ .name = /* micron */ "spi-authenta" },
+	{ .name = /* rohm */ "bh2228fv" },
+	{ .name = /* rohm */ "dh2228fv" },
+	{ .name = /* semtech */ "sx1301" },
+	{ .name = /* silabs */ "em3581" },
+	{ .name = /* silabs */ "si3210" },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, spidev_spi_ids);

base-commit: fdb298fa865b0136f7be842e6c2e6310dede421a
-- 
2.45.2