Re: [PATCH v1 1/1] mfd: rk8xx: Fix shutdown handler

[Dmitry Osipenko <dmitry.osipenko@xxxxxxxxxxxxx>]

On 8/1/24 20:52, Sebastian Reichel wrote:
> Hi,
> 
> On Thu, Aug 01, 2024 at 07:41:44PM GMT, Heiko Stübner wrote:
>> Am Donnerstag, 1. August 2024, 17:31:33 CEST schrieb Dmitry Osipenko:
>>> On 7/30/24 21:05, Sebastian Reichel wrote:
>>>> +	/*
>>>> +	 * Currently the Rockchip SPI driver always sleeps when doing SPI
>>>> +	 * transfers. This is not allowed in the SYS_OFF_MODE_POWER_OFF
>>>> +	 * handler, so we are using the prepare handler as a workaround.
>>>> +	 * This should be removed once the Rockchip SPI driver has been
>>>> +	 * adapted.
>>>> +	 */
>>>> +	if (is_spi)
>>>> +		pwr_off_mode = SYS_OFF_MODE_POWER_OFF_PREPARE;
>>>
>>> This prevents the syscore_shutdown() step from execution. Is it better
>>> than not powering off?
>>>
>>> I'd rather skip registration of the power-off handlers in a case of SPI :)
>>
>> Or blasphemous thought, we could live with the warning-splash for a bit.
>>
>> From Sebastian's log I assume the WARNING comes from the
>> wait_for_completion() in spi_transfer_wait(), and I guess the transfer
>> with the poweroff command itself will already have happened then?
>>
>> So the device is most likely still powered off in that case?
>> Not sure how much of "bad taste" that thought is though ;-)
> 
> Yes, as far as I could see it works fine (the splash from the commit
> message is from exactly this solution running on RK3588 EVB1 and the
> board was powered off properly as far as I can tell). But it felt a
> bit strange to knowingly introduce an error splash in a fix intended
> for being backported to the stable trees, so I switched to the current
> version before sending.

Can you add a busy-wait to the SPI driver TX func for the case where
it's invoked with a disabled interrupts? That could be a better
workaround, silencing the warning and keeping power-off working properly.

-- 
Best regards,
Dmitry