Re: [PATCH v3 03/14] dt-bindings: fsi: Document the FSI2PIB engine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/26/24 01:18, Krzysztof Kozlowski wrote:
On 25/04/2024 23:36, Eddie James wrote:
The FSI2PIB or SCOM engine provides an interface to the POWER processor
PIB (Pervasive Interconnect Bus).

Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
---
  .../devicetree/bindings/fsi/ibm,fsi2pib.yaml  | 38 +++++++++++++++++++
  1 file changed, 38 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml

diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml
new file mode 100644
index 000000000000..4d557150c2e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,fsi2pib.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SCOM engine
+
+maintainers:
+  - Eddie James <eajames@xxxxxxxxxxxxx>
+
+description:
+  The SCOM engine is an interface to the POWER processor PIB (Pervasive
+  Interconnect Bus). This node will always be a child of an FSI CFAM node;
+  see fsi.txt for details on FSI slave and CFAM nodes.
+
+properties:
+  compatible:
+    enum:
+      - ibm,fsi2pib
+      - ibm,i2cr-scom
Sometimes you call these p9, sometimes p10... what is the system or SoC
here? Aren't you adding some generic compatibles? writing-bindings and
numerous guides are clear on that.


Open source FSI support started with P9 chips so we initially added p9-sbefifo, p9-occ, etc. P10 has all of the same engines as P9 plus the SPI controller, so that's why SPI is p10-spi. P11 has the same engines as P10. For scom/fsi2pib we could call it p9-scom I suppose... This series isn't just documentation for a new system, I'm adding documentation that should have been added for P9. Anyway I'm not sure what you mean about generic compatibles? You mean just add a "scom" or "fsi2pib" compatible? writing-bindings says "DO make 'compatible' properties specific"


Thanks,

Eddie



Best regards,
Krzysztof





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux