Re: [PATCH v3 03/14] dt-bindings: fsi: Document the FSI2PIB engine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 25/04/2024 23:36, Eddie James wrote:
> The FSI2PIB or SCOM engine provides an interface to the POWER processor
> PIB (Pervasive Interconnect Bus).
> 
> Signed-off-by: Eddie James <eajames@xxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/fsi/ibm,fsi2pib.yaml  | 38 +++++++++++++++++++
>  1 file changed, 38 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml
> 
> diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml
> new file mode 100644
> index 000000000000..4d557150c2e3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml
> @@ -0,0 +1,38 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/fsi/ibm,fsi2pib.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: IBM FSI-attached SCOM engine
> +
> +maintainers:
> +  - Eddie James <eajames@xxxxxxxxxxxxx>
> +
> +description:
> +  The SCOM engine is an interface to the POWER processor PIB (Pervasive
> +  Interconnect Bus). This node will always be a child of an FSI CFAM node;
> +  see fsi.txt for details on FSI slave and CFAM nodes.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ibm,fsi2pib
> +      - ibm,i2cr-scom

Sometimes you call these p9, sometimes p10... what is the system or SoC
here? Aren't you adding some generic compatibles? writing-bindings and
numerous guides are clear on that.

Best regards,
Krzysztof





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux