Re: [PATCH v2 4/4] dt-bindings: aspeed: Add eSPI controller

Manojkiran Eda <manojkiran.eda@xxxxxxxxx> · Thu, 28 Mar 2024 17:03:30 +0530

On 20/03/24 8:14 pm, Krzysztof Kozlowski wrote:
On 20/03/2024 10:59, Manojkiran Eda wrote:

On 19/03/24 3:26 pm, Krzysztof Kozlowski wrote:
On 19/03/2024 10:34, Manojkiran Eda wrote:
This commit adds the device tree bindings for aspeed eSPI
controller.

Although aspeed eSPI hardware supports 4 different channels,
this commit only adds the support for flash channel, the
bindings for other channels could be upstreamed when the driver
support for those are added.

Signed-off-by: Manojkiran Eda<manojkiran.eda@xxxxxxxxx>
---
   .../bindings/soc/aspeed/aspeed,espi.yaml      | 94 +++++++++++++++++++
   1 file changed, 94 insertions(+)
   create mode 100644 Documentation/devicetree/bindings/soc/aspeed/aspeed,espi.yaml

diff --git a/Documentation/devicetree/bindings/soc/aspeed/aspeed,espi.yaml b/Documentation/devicetree/bindings/soc/aspeed/aspeed,espi.yaml
new file mode 100644
index 000000000000..3d3ad528e3b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/aspeed/aspeed,espi.yaml
Why Rob's comments got ignored?

This is not a soc component.
I did not mean to ignore, i have few reasons listed below that provides
information on why i felt this belongs into soc.

soc is dumping ground of things which are purely SoC specific, not
covered by existing hardware structure in bindings. Maybe indeed this
does not have any other place, but did you actually look?


Yes, i did look at existing hardware bindings, and cannot seem to find 
out any other suitable place. I can definitely look again.

Anyway, please CC SPI maintainers on future submission.

Sure, will add them.



@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# # Copyright (c) 2024 IBM Corporation.
+# # Copyright (c) 2021 Aspeed Technology Inc.
+%YAML 1.2
+---
+$id:http://devicetree.org/schemas/soc/aspeed/aspeed,espi.yaml#
+$schema:http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed eSPI Controller
+
+maintainers:
+  - Manojkiran Eda<manojkiran.eda@xxxxxxxxx>
+  - Patrick Rudolph<patrick.rudolph@xxxxxxxxxxxxx>
+  - Chia-Wei Wang<chiawei_wang@xxxxxxxxxxxxxx>
+  - Ryan Chen<ryan_chen@xxxxxxxxxxxxxx>
+
+description:
+  Aspeed eSPI controller implements a device side eSPI endpoint device
+  supporting the flash channel.
Explain what is eSPI.
eSPI is a serial bus interface for client and server platforms that is

Explain in description of the hardware.

Sure, i will add this description in the binding document in the future 
submission.

based on SPI,  using the same master and slave topology but operates
with a different protocol to meet new requirements. For instance, eSPI
uses I/O, or input/output, communication, instead of MOSI/MISO used in
SPI. It also includes a transaction layer on top of the SPI protocol,
defining packets such as command and response packets that allow both
the master and slave to initiate alert and reset signals. eSPI supports
communication between Embedded Controller (EC), Baseboard Management
Controller (BMC), Super-I/O (SIO) and Port-80 debug cards. I could add
this to the commit message as well in the next patchset.

+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2500-espi
+          - aspeed,ast2600-espi
+      - const: simple-mfd

That's not simple-mfd. You have driver for this. Drop.

+      - const: syscon
That's not syscon. Why do you have ranges then? Where is any explanation
of hardware which would justify such combination?

+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^espi-ctrl@[0-9a-f]+$":
+    type: object
+
+    description: Controls the flash channel of eSPI hardware
That explains nothing. Unless you wanted to use here MTD bindings.

This binding did not improve much. I don't understand why this is not
SPI (nothing in commit msg, nothing in description), what is eSPI,

eSPI uses Peripheral, Virtual Wire, Out of Band, and Flash Access
channels to communicate different sets of data.

And what are these channels? What does it mean a "channel"? Is it just
how you organize transfers and classes of devices? Or some sort of
addressable instance on the bus?


Yes, an espi channel provides a means to allow multiple independent 
flows of traffic to share the same physical bus. Each of the channels 
has its own dedicated resources such as queue and flow control.

The channels feel like some sort of software or logical concept, not
physical. Physical would be endpoint with peripheral. Or flash memory.

A channel is a logical communication pathway or interface between the 
chipset and peripheral devices. The concept of channels in the ESPI 
protocol helps organize and manage different types of communication 
between the chipset and peripherals. Each channel may have its own set 
of protocols, data transfer rates, and supported features, tailored to 
the requirements of the devices it serves.

How do they fit here?

I am not sure I understand, can you please elaborate ?


   * The *Peripheral* Channel is used for communication between eSPI host
     bridge located on the master side and eSPI endpoints located on the
     slave side. LPC Host and LPC Peripherals are an example of eSPI host
     bridge and eSPI endpoints respectively.
   * *Virtual Wire* Channel: The Virtual Wire channel is used to
     communicate the state of sideband pins or GPIO tunneled through eSPI
     as in-band messages. Serial IRQ interrupts are communicated through
     this channel as in-band messages.
   * *OOB* Channel: The SMBus packets are tunneled through eSPI as
     Out-Of-Band (OOB) messages. The whole SMBus packet is embedded
     inside the eSPI OOB message as data.
   * *Flash Access* Channel: The Flash Access channel provides a path
     allowing the flash components to be shared run-time between chipset
     and the eSPI slaves that require flash accesses such as EC (Embedded
     Controller) and BMC.

Please make binding complete, so define all of the channels.


I would like to inquire about the rationale behind this request. Based 
on previous feedback received from the upstream efforts 
[https://lore.kernel.org/openbmc/HK0PR06MB37798462D17443C697433D7191D09@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/], 
suggestions were made to model the flash channel by utilizing the mtd 
subsystem, the virtual wire channel by utilizing the GPIO subsystem, and 
to consider the OOB channel as a type of i2c device, thereby allowing it 
to be utilized by the existing in-kernel MCTP subsystem, among others. 
My intention was to prioritize upstreaming the flash channel binding, 
along with its driver code, before proceeding to address other channels. 
I am curious to understand if it is a strict requirement to have the 
complete binding upstreamed before addressing the device drivers code.



Although , eSPI reuses the timing and electrical specification of Serial
Peripheral Interface (SPI) but it runs an entirely different protocol to
meet a set of different requirements. Which is why i felt probably
placing this in soc was a better choice rather than spi. Do you think
otherwise ?

soc is dumping ground for things do not fit other places. Are there any
other buses / IP blocks similar to this one?


Best regards,
Krzysztof


Thanks,
Manoj







