Re: [PATCH 1/5] spi: dt-bindings: add binding doc for spi-qpic-snand

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 2/15/2024 7:54 PM, Conor Dooley wrote:
On Thu, Feb 15, 2024 at 07:18:52PM +0530, Md Sadre Alam wrote:
Add device-tree binding documentation for QCOM QPIC-SNAND-NAND Flash
Interface.

Co-developed-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
Co-developed-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
Signed-off-by: Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>
---
  .../bindings/spi/qcom,spi-qpic-snand.yaml     | 82 +++++++++++++++++++
  1 file changed, 82 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml

diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
new file mode 100644
index 000000000000..fa7484ce1319
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/qcom,spi-qpic-snand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QPIC NAND controller
+
+maintainers:
+  - Md sadre Alam <quic_mdalam@xxxxxxxxxxx>
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq9574-snand
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+  - if:

+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq9574-snand
+
+    then:
+      properties:
+        dmas:
+          items:
+            - description: tx DMA channel
+            - description: rx DMA channel
+            - description: cmd DMA channel
+
+        dma-names:
+          items:
+            - const: tx
+            - const: rx
+            - const: cmd

None of this complexity here is needed, you have only one device in this
binding and therefore can define these properties at the top level.

 Thanks for reviewing, Will fix this in next patch.

Cheers,
Conor.

+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
+    qpic_nand: spi@79b0000 {
+        compatible = "qcom,ipq9574-snand";
+        reg = <0x1ac00000 0x800>;
+
+        clocks = <&gcc GCC_QPIC_CLK>,
+                 <&gcc GCC_QPIC_AHB_CLK>,
+                 <&gcc GCC_QPIC_IO_MACRO_CLK>;
+        clock-names = "core", "aon", "iom";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "spi-nand";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            nand-ecc-engine = <&qpic_nand>;
+            nand-ecc-strength = <4>;
+            nand-ecc-step-size = <512>;
+            };
+        };
--
2.34.1





[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux