[PATCH 0/5] Add QPIC SPI NAND driver

[Md Sadre Alam <quic_mdalam@xxxxxxxxxxx>]

This series of patches will add initial supports
for QPIC SPI NAND driver.

Currently this driver support following commands

-- RESET
-- READ ID
-- BLOCK ERASE
-- PAGE READ
-- PAGE WRITE
-- GET FEATURE
-- SET FEATURE
-- BAD BLOCK CHECK

This driver has been tested with dd command with read/write page
with multiple file size 1MiB, 10MiB,40MiB etc.
Also tested with "mtd" command like mtd erase, mtd write, mtd verify etc.

Need help to test these all patches on SDX65 and SDX75 platform.

Md Sadre Alam (5):
  spi: dt-bindings: add binding doc for spi-qpic-snand
  drivers: mtd: nand: Add qpic_common API file
  spi: spi-qpic: Add qpic spi nand driver support
  arm64: dts: qcom: ipq9574: Add SPI nand support
  arm64: dts: qcom: ipq9574: Disable eMMC node

 .../bindings/spi/qcom,spi-qpic-snand.yaml     |   82 ++
 .../boot/dts/qcom/ipq9574-rdp-common.dtsi     |   43 +
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts   |    2 +-
 arch/arm64/boot/dts/qcom/ipq9574.dtsi         |   27 +
 drivers/mtd/nand/Makefile                     |    1 +
 drivers/mtd/nand/qpic_common.c                |  794 +++++++++++
 drivers/mtd/nand/raw/qcom_nandc.c             | 1226 +----------------
 drivers/spi/Kconfig                           |    9 +
 drivers/spi/Makefile                          |    1 +
 drivers/spi/spi-qpic-snand.c                  | 1025 ++++++++++++++
 include/linux/mtd/nand-qpic-common.h          |  548 ++++++++
 11 files changed, 2547 insertions(+), 1211 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml
 create mode 100644 drivers/mtd/nand/qpic_common.c
 create mode 100644 drivers/spi/spi-qpic-snand.c
 create mode 100644 include/linux/mtd/nand-qpic-common.h

-- 
2.34.1