Re: [PATCH] spi: s3c64xx: clear loopback bit after loopback test

[Andi Shyti <andi.shyti@xxxxxxxxxx>]

Hi Jaewon,

On Tue, Jul 11, 2023 at 05:20:20PM +0900, Jaewon Kim wrote:
> When SPI loopback transfer is performed, S3C64XX_SPI_MODE_SELF_LOOPBACK
> bit still remained. It works as loopback even if the next transfer is
> not spi loopback mode.
> If not SPI_LOOP, needs to clear S3C64XX_SPI_MODE_SELF_LOOPBACK bit.
> 
> Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>

with the change suggested by Chanho:

Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx> 

Mark, can you add the

Fixes: ffb7bcd3b27e ("spi: s3c64xx: support loopback mode")

tag or should Jaewon resend?

Thanks,
Andi

> ---
>  drivers/spi/spi-s3c64xx.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
> index fd55697144cc..b6c2659a66ca 100644
> --- a/drivers/spi/spi-s3c64xx.c
> +++ b/drivers/spi/spi-s3c64xx.c
> @@ -684,6 +684,8 @@ static int s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
>  
>  	if ((sdd->cur_mode & SPI_LOOP) && sdd->port_conf->has_loopback)
>  		val |= S3C64XX_SPI_MODE_SELF_LOOPBACK;
> +	else
> +		val &= ~S3C64XX_SPI_MODE_SELF_LOOPBACK;
>  
>  	writel(val, regs + S3C64XX_SPI_MODE_CFG);
>  
> -- 
> 2.17.1
>