[PATCH] spi: s3c64xx: clear loopback bit after loopback test

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When SPI loopback transfer is performed, S3C64XX_SPI_MODE_SELF_LOOPBACK
bit still remained. It works as loopback even if the next transfer is
not spi loopback mode.
If not SPI_LOOP, needs to clear S3C64XX_SPI_MODE_SELF_LOOPBACK bit.

Signed-off-by: Jaewon Kim <jaewon02.kim@xxxxxxxxxxx>
---
 drivers/spi/spi-s3c64xx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index fd55697144cc..b6c2659a66ca 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -684,6 +684,8 @@ static int s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 
 	if ((sdd->cur_mode & SPI_LOOP) && sdd->port_conf->has_loopback)
 		val |= S3C64XX_SPI_MODE_SELF_LOOPBACK;
+	else
+		val &= ~S3C64XX_SPI_MODE_SELF_LOOPBACK;
 
 	writel(val, regs + S3C64XX_SPI_MODE_CFG);
 
-- 
2.17.1




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux