Re: [PATCH] spi: spi-geni-qcom: Correct CS_TOGGLE bit in SPI_TRANS_CFG

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>]

On 1.05.2023 14:43, Konrad Dybcio wrote:
> 
> 
> On 1.05.2023 10:05, Vijaya Krishna Nivarthi wrote:
>> On 4/25/2023 7:15 PM, Konrad Dybcio wrote:
>>>
>>> On 4/25/23 09:42, Vijaya Krishna Nivarthi wrote:
>>>> The CS_TOGGLE bit when set is supposed to instruct FW to
>>>> toggle CS line between words. The driver with intent of
>>>> disabling this behaviour has been unsetting BIT(0). This has
>>>> not caused any trouble so far because the original BIT(1)
>>>> is untouched and BIT(0) likely wasn't being used.
>>>>
>>>> Correct this to prevent a potential future bug.
>>>>
>>>> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@xxxxxxxxxxx>
>>>> ---
>>>
>>> Has this always been the case, or did the switch to BIT(1)
>>> only occur on some recent platforms?
>>
>>
>> Thank you very much for the review..
>>
>> This has always been the case.
>>
>> With intent of disabling CS_TOGGLE, currently, the driver is unsetting BIT(0), though it should have been BIT(1).
>>
>> Yet no problem was encountered because
>>
>> a) BIT(0) seems to be an unused bit
>>
>> b) BIT(1) is probably already unset because its untouched
>>
>> Further more, as Doug pointed we are mostly using GPIO for CS.
>>
>>
>> Testing with the change has not caused any regressions.
> Okay, with no deeper knowledge of the topic best I can give you is:
> 
> Acked-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> 
> 
Also, missing:

Fixes: 561de45f72bd ("spi: spi-geni-qcom: Add SPI driver support for GENI based QUP")

Konrad
> Konrad
>>
>>
>> Thank you,
>>
>> Vijay/
>>
>>
>>
>>>
>>> Konrad
>>>
>>>>   drivers/spi/spi-geni-qcom.c | 2 +-
>>>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
>>>> index ba7be50..8a7d1c2 100644
>>>> --- a/drivers/spi/spi-geni-qcom.c
>>>> +++ b/drivers/spi/spi-geni-qcom.c
>>>> @@ -35,7 +35,7 @@
>>>>   #define CS_DEMUX_OUTPUT_SEL    GENMASK(3, 0)
>>>>     #define SE_SPI_TRANS_CFG    0x25c
>>>> -#define CS_TOGGLE        BIT(0)
>>>> +#define CS_TOGGLE        BIT(1)
>>>>     #define SE_SPI_WORD_LEN        0x268
>>>>   #define WORD_LEN_MSK        GENMASK(9, 0)