The commit 5e0531f6b90a ("spi: Add capability to perform some transfer with chipselect off") added a new flag but squeezed it into a wrong group of struct spi_transfer members (note that SPI_NBITS_* are macros for easier interpretation of the tx_nbits and rx_nbits bitfields). Group cs_change and cs_off flags together and their doc strings. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- v2: fixed some grammar issues, grouped doc strings as well include/linux/spi/spi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index e111cf5e77de..6ea889df0813 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -848,8 +848,8 @@ struct spi_res { * @bits_per_word: select a bits_per_word other than the device default * for this transfer. If 0 the default (from @spi_device) is used. * @dummy_data: indicates transfer is dummy bytes transfer. - * @cs_change: affects chipselect after this transfer completes * @cs_off: performs the transfer with chipselect off. + * @cs_change: affects chipselect after this transfer completes * @cs_change_delay: delay between cs deassert and assert when * @cs_change is set and @spi_transfer is not the last in @spi_message * @delay: delay to be introduced after this transfer before @@ -959,10 +959,10 @@ struct spi_transfer { struct sg_table rx_sg; unsigned dummy_data:1; + unsigned cs_off:1; unsigned cs_change:1; unsigned tx_nbits:3; unsigned rx_nbits:3; - unsigned cs_off:1; #define SPI_NBITS_SINGLE 0x01 /* 1bit transfer */ #define SPI_NBITS_DUAL 0x02 /* 2bits transfer */ #define SPI_NBITS_QUAD 0x04 /* 4bits transfer */ -- 2.35.1