Re: [PATCH 03/11] spi: dw: define spi_frf for dual/quad/octal modes

[Serge Semin <fancer.lancer@xxxxxxxxx>]

On Tue, Aug 02, 2022 at 06:57:47PM +0100, Sudip Mukherjee wrote:
> The SPI mode needs to be mentioned in CTRLR0[23:22] register. Define a
> configuration variable to keep the mode based on the buswidth, which will
> then be used to update CR0. If the transfer is using dual/quad/octal
> mode then mark enhanced_spi as true.
> 
> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@xxxxxxxxxx>
> ---
>  drivers/spi/spi-dw-core.c | 29 +++++++++++++++++++++++++++++
>  drivers/spi/spi-dw.h      |  7 +++++++
>  2 files changed, 36 insertions(+)
> 
> diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
> index 77529e359b6d..8c84a2e991b5 100644
> --- a/drivers/spi/spi-dw-core.c
> +++ b/drivers/spi/spi-dw-core.c
> @@ -333,6 +333,14 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
>  		/* CTRLR0[11:10] Transfer Mode */
>  		cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_TMOD_MASK, cfg->tmode);
>  

> +	if (dws->caps & DW_SPI_CAP_EXT_SPI) {

Drop this conditional statement. Just always set the spi_frf field.


> +		if (cfg->spi_frf)

Drop this conditional statement. Just always set the spi_frf. It shall
be zero if the Enhanced SPI modes are unsupported.

> +			cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_SPI_FRF_MASK,

Since the SPI_FRF field has different offset in the DW APB and DW AHB
SSI controllers, you'll need to initialize the mode based on the
IP-core ID using the dw_spi_ip_is() macro (see the as it's done for
tmode).

> +				cfg->spi_frf);
> +		else

> +			cr0 &= ~DW_HSSI_CTRLR0_SPI_FRF_MASK;

This is redundant. The initial value never has the SPI_FRF field set
(see the dw_spi_setup() and dw_spi_prepare_cr0() methods for details).

> +	}
> +
>  	dw_writel(dws, DW_SPI_CTRLR0, cr0);
>  
>  	if (cfg->tmode == DW_SPI_CTRLR0_TMOD_EPROMREAD ||
> @@ -679,10 +687,31 @@ static void dw_spi_stop_mem_op(struct dw_spi *dws, struct spi_device *spi)
>  static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
>  {
>  	struct dw_spi *dws = spi_controller_get_devdata(mem->spi->controller);
> +	bool enhanced_spi = false;
>  	struct dw_spi_cfg cfg;
>  	unsigned long flags;
>  	int ret;
>  

> +	if (dws->caps & DW_SPI_CAP_EXT_SPI) {
> +		switch (op->data.buswidth) {
> +		case 2:
> +			cfg.spi_frf = DW_SSI_CTRLR0_SPI_FRF_DUAL_SPI;
> +			enhanced_spi = true;
> +			break;
> +		case 4:
> +			cfg.spi_frf = DW_SSI_CTRLR0_SPI_FRF_QUAD_SPI;
> +			enhanced_spi = true;
> +			break;
> +		case 8:
> +			cfg.spi_frf = DW_SSI_CTRLR0_SPI_FRF_OCT_SPI;
> +			enhanced_spi = true;
> +			break;
> +		default:
> +			cfg.spi_frf = 0;
> +			break;
> +		}
> +	}
> +

Please create a separate dw_spi_exec_enh_mem_op() method for the
Enhanced SPI communications and parse the data.buswidth field there.
Also it would be better to define a new macro
DW_SSI_CTRLR0_SPI_FRF_STD_SPI and use it instead of the explicit zero
SPI_FRF value.

>  	/*
>  	 * Collect the outbound data into a single buffer to speed the
>  	 * transmission up at least on the initial stage.
> diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
> index 71d18e9291a3..b8cc20e0deaa 100644
> --- a/drivers/spi/spi-dw.h
> +++ b/drivers/spi/spi-dw.h
> @@ -96,6 +96,12 @@
>  #define DW_HSSI_CTRLR0_SRL			BIT(13)
>  #define DW_HSSI_CTRLR0_MST			BIT(31)
>  

> +/* Bit fields in CTRLR0 for enhanced SPI */

No need in the comment. The macros name is descriptive enough.

> +#define DW_HSSI_CTRLR0_SPI_FRF_MASK		GENMASK(23, 22)

Please also add the next new macros
#define DW_PSSI_CTRLR0_SPI_FRF_MASK		GENMASK(22, 21)
#define DW_SSI_CTRLR0_SPI_FRF_STD_SPI		0x0

and group them together with the rest of the APB SSI CTRL0 macros.

> +#define DW_SSI_CTRLR0_SPI_FRF_DUAL_SPI		0x1
> +#define DW_SSI_CTRLR0_SPI_FRF_QUAD_SPI		0x2
> +#define DW_SSI_CTRLR0_SPI_FRF_OCT_SPI		0x3

Please move these to be defined together with the APB SSI
CTRL0.SPI_FRF-related macros.

-Sergey

> +
>  /* Bit fields in CTRLR1 */
>  #define DW_SPI_NDF_MASK				GENMASK(15, 0)
>  
> @@ -136,6 +142,7 @@ struct dw_spi_cfg {
>  	u8 dfs;
>  	u32 ndf;
>  	u32 freq;
> +	u8 spi_frf;
>  };
>  
>  struct dw_spi;
> -- 
> 2.30.2
>