[PATCH 03/11] spi: dw: define spi_frf for dual/quad/octal modes

[Sudip Mukherjee <sudip.mukherjee@xxxxxxxxxx>]

The SPI mode needs to be mentioned in CTRLR0[23:22] register. Define a
configuration variable to keep the mode based on the buswidth, which will
then be used to update CR0. If the transfer is using dual/quad/octal
mode then mark enhanced_spi as true.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@xxxxxxxxxx>
---
 drivers/spi/spi-dw-core.c | 29 +++++++++++++++++++++++++++++
 drivers/spi/spi-dw.h      |  7 +++++++
 2 files changed, 36 insertions(+)

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 77529e359b6d..8c84a2e991b5 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -333,6 +333,14 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
 		/* CTRLR0[11:10] Transfer Mode */
 		cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_TMOD_MASK, cfg->tmode);
 
+	if (dws->caps & DW_SPI_CAP_EXT_SPI) {
+		if (cfg->spi_frf)
+			cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_SPI_FRF_MASK,
+				cfg->spi_frf);
+		else
+			cr0 &= ~DW_HSSI_CTRLR0_SPI_FRF_MASK;
+	}
+
 	dw_writel(dws, DW_SPI_CTRLR0, cr0);
 
 	if (cfg->tmode == DW_SPI_CTRLR0_TMOD_EPROMREAD ||
@@ -679,10 +687,31 @@ static void dw_spi_stop_mem_op(struct dw_spi *dws, struct spi_device *spi)
 static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op)
 {
 	struct dw_spi *dws = spi_controller_get_devdata(mem->spi->controller);
+	bool enhanced_spi = false;
 	struct dw_spi_cfg cfg;
 	unsigned long flags;
 	int ret;
 
+	if (dws->caps & DW_SPI_CAP_EXT_SPI) {
+		switch (op->data.buswidth) {
+		case 2:
+			cfg.spi_frf = DW_SSI_CTRLR0_SPI_FRF_DUAL_SPI;
+			enhanced_spi = true;
+			break;
+		case 4:
+			cfg.spi_frf = DW_SSI_CTRLR0_SPI_FRF_QUAD_SPI;
+			enhanced_spi = true;
+			break;
+		case 8:
+			cfg.spi_frf = DW_SSI_CTRLR0_SPI_FRF_OCT_SPI;
+			enhanced_spi = true;
+			break;
+		default:
+			cfg.spi_frf = 0;
+			break;
+		}
+	}
+
 	/*
 	 * Collect the outbound data into a single buffer to speed the
 	 * transmission up at least on the initial stage.
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 71d18e9291a3..b8cc20e0deaa 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -96,6 +96,12 @@
 #define DW_HSSI_CTRLR0_SRL			BIT(13)
 #define DW_HSSI_CTRLR0_MST			BIT(31)
 
+/* Bit fields in CTRLR0 for enhanced SPI */
+#define DW_HSSI_CTRLR0_SPI_FRF_MASK		GENMASK(23, 22)
+#define DW_SSI_CTRLR0_SPI_FRF_DUAL_SPI		0x1
+#define DW_SSI_CTRLR0_SPI_FRF_QUAD_SPI		0x2
+#define DW_SSI_CTRLR0_SPI_FRF_OCT_SPI		0x3
+
 /* Bit fields in CTRLR1 */
 #define DW_SPI_NDF_MASK				GENMASK(15, 0)
 
@@ -136,6 +142,7 @@ struct dw_spi_cfg {
 	u8 dfs;
 	u32 ndf;
 	u32 freq;
+	u8 spi_frf;
 };
 
 struct dw_spi;
-- 
2.30.2