Re: [PATCH 1/2 v3] dt-bindings: dspi: added for semtech sx1301

[Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>]

On 20/04/2022 05:50, Changming Huang wrote:
> Add DT Binding doc for semtech sx1301
> 
> Signed-off-by: Changming Huang <jerry.huang@xxxxxxx>
> ---
> changes in v3:
>   - add the dt-bindings
> 
>  .../bindings/spi/semtech,sx1301.yaml          | 45 +++++++++++++++++++
>  1 file changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/semtech,sx1301.yaml
> 
> diff --git a/Documentation/devicetree/bindings/spi/semtech,sx1301.yaml b/Documentation/devicetree/bindings/spi/semtech,sx1301.yaml
> new file mode 100644
> index 000000000000..f65fb5809218
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/semtech,sx1301.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/spi/semtech,sx1301.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Semtech sx1301 devicetree bindings

Remove "devicetree bindings" and add instead short description (type) of
the device (SPI controller?).

> +
> +allOf:
> +  - $ref: "spi-controller.yaml"

allOf after maintainers.

> +
> +maintainers:
> +  - Changming Huang <jerry.huang@xxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: semtech,sx1301
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-max-frequency: true
> +
> +  fsl,spi-cs-sck-delay: true
> +
> +  fsl,spi-sck-cs-delay: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - spi-max-frequency
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    mikrobus@0 {

Isn't MikroBUS more than SPI, but you implement here only it's part? If
so, name it just "spi".


Best regards,
Krzysztof