[PATCH 2/2 v3] arm64: dts: fsl-ls1028a: add dspi2 support

[Changming Huang <jerry.huang@xxxxxxx>]

Enable MikroBUS SPI port.

Signed-off-by: Changming Huang <jerry.huang@xxxxxxx>
---
changes in v3:
  - add the dt-bindings

 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 68c31cb8eead..6d0508d5abd0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -117,6 +117,19 @@ &duart1 {
 	status = "okay";
 };
 
+&dspi2 {
+	bus-num = <2>;
+	status = "okay";
+
+	mikrobus@0 {
+		compatible = "semtech,sx1301";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+		fsl,spi-cs-sck-delay = <1000000>;
+		fsl,spi-sck-cs-delay = <50>;
+	};
+};
+
 &enetc_mdio_pf3 {
 	sgmii_phy0: ethernet-phy@2 {
 		reg = <0x2>;
-- 
2.25.1