Re: [PATCH v5 12/13] spi: mxic: Use spi_mem_generic_supports_op()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Boris,

boris.brezillon@xxxxxxxxxxxxx wrote on Tue, 14 Dec 2021 17:24:10 +0100:

> On Tue, 14 Dec 2021 12:41:39 +0100
> Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:
> 
> > This driver can be simplified a little bit by using
> > spi_mem_generic_supports_op() instead of the
> > spi_mem_default/dtr_supports_op() couple. The all_false boolean is
> > inverted to become a dtr boolean, which checks if at least one of the
> > operation member uses dtr mode. The idea behind this change is to
> > simplify the introduction of the pipelined ECC engine.
> > 
> > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> > ---
> >  drivers/spi/spi-mxic.c | 10 +++-------
> >  1 file changed, 3 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c
> > index 485a7f2afb44..5e71aa630504 100644
> > --- a/drivers/spi/spi-mxic.c
> > +++ b/drivers/spi/spi-mxic.c
> > @@ -452,7 +452,7 @@ static ssize_t mxic_spi_mem_dirmap_write(struct spi_mem_dirmap_desc *desc,
> >  static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
> >  				     const struct spi_mem_op *op)
> >  {
> > -	bool all_false;
> > +	struct spi_mem_controller_caps caps = {};
> >  
> >  	if (op->data.buswidth > 8 || op->addr.buswidth > 8 ||
> >  	    op->dummy.buswidth > 8 || op->cmd.buswidth > 8)
> > @@ -465,13 +465,9 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
> >  	if (op->addr.nbytes > 7)
> >  		return false;
> >  
> > -	all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr &&
> > -		    !op->data.dtr;
> > +	caps.dtr = op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr;  
> 
> Are you sure that's what you want to do? spi_mem_controller_caps is
> supposed to encode the controller capabilities, not whether the
> operation contains a DTR cycle or not. I'd expect this caps object to be
> statically defined, with possibly one instance per-compat if the caps
> depend on the HW revision.

In order to keep the series easy to review I decided to go for the
following approach:
* Introduce the spi_mem_generic_supports_op_helper() which takes a
  capabilities structure. This helper gathers all the checks from
  spi_mem_default_supports_op() and spi_mem_dtr_supports_op(). These
  two helpers now call the new one with either a NULL pointer in the
  former case, or a structure with the .dtr parameter set to true in
  the latter.
* Change the API of spi_mem_default_supports_op(), this involves
  updating many different drivers so this change does only that in a
  very transparent way, with no functional changes at all. All the
  drivers provide a NULL parameter for the capabilities structure.
* Actually make use of the new parameter of
  spi_mem_default_supports_op() in the drivers Cadence and Macronix,
  which do have DTR support. This kills the spi_mem_dtr_supports_op()
  helper.
* Kill the temporary spi_mem_generic_supports_op() helper by moving
  all the logic back into spi_mem_default_supports_op().

This approach is really straightforward and easily bisectable if
needed. While working on this, I fixed the check we discussed on IRC
about the command parameter when in a DTR operation. I also reverted
the logic in the various checks, as you suggested.

Thanks,
Miquèl



[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux