[PATCH 3/4] spi: spi-nxp-fspi: add DDR mode support

[haibo.chen@xxxxxxx]

From: Haibo Chen <haibo.chen@xxxxxxx>

For LUT, add DDR command support.
Also use new API spi_mem_dtr_supports_op() to check the DTR mode.

Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
---
 drivers/spi/spi-nxp-fspi.c | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index a764eb475aed..f7acad2cbe64 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -486,6 +486,9 @@ static bool nxp_fspi_supports_op(struct spi_mem *mem,
 	    op->data.nbytes > f->devtype_data->txfifo)
 		return false;
 
+	if (op->cmd.dtr && op->addr.dtr && op->dummy.dtr && op->data.dtr)
+		return spi_mem_dtr_supports_op(mem, op);
+
 	return spi_mem_default_supports_op(mem, op);
 }
 
@@ -534,12 +537,22 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 	int lutidx = 1, i;
 
 	/* cmd */
-	lutval[0] |= LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth),
-			     op->cmd.opcode);
+	if (op->cmd.dtr) {
+		lutval[0] |= LUT_DEF(0, LUT_CMD_DDR, LUT_PAD(op->cmd.buswidth),
+				     op->cmd.opcode >> 8);
+		lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_CMD_DDR,
+					      LUT_PAD(op->cmd.buswidth),
+					      op->cmd.opcode & 0x00ff);
+		lutidx++;
+	} else {
+		lutval[0] |= LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth),
+				     op->cmd.opcode);
+	}
 
 	/* addr bytes */
 	if (op->addr.nbytes) {
-		lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_ADDR,
+		lutval[lutidx / 2] |= LUT_DEF(lutidx, op->addr.dtr ?
+					      LUT_ADDR_DDR : LUT_ADDR,
 					      LUT_PAD(op->addr.buswidth),
 					      op->addr.nbytes * 8);
 		lutidx++;
@@ -547,7 +560,8 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 
 	/* dummy bytes, if needed */
 	if (op->dummy.nbytes) {
-		lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_DUMMY,
+		lutval[lutidx / 2] |= LUT_DEF(lutidx, op->dummy.dtr ?
+					      LUT_DUMMY_DDR : LUT_DUMMY,
 		/*
 		 * Due to FlexSPI controller limitation number of PAD for dummy
 		 * buswidth needs to be programmed as equal to data buswidth.
@@ -562,7 +576,8 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 	if (op->data.nbytes) {
 		lutval[lutidx / 2] |= LUT_DEF(lutidx,
 					      op->data.dir == SPI_MEM_DATA_IN ?
-					      LUT_NXP_READ : LUT_NXP_WRITE,
+					      (op->data.dtr ? LUT_READ_DDR : LUT_NXP_READ) :
+					      (op->data.dtr ? LUT_WRITE_DDR : LUT_NXP_WRITE),
 					      LUT_PAD(op->data.buswidth),
 					      0);
 		lutidx++;
-- 
2.17.1