From: Mason Zhang <Mason.Zhang@xxxxxxxxxxxx> This patch support tick_delay setting, some users need use high-speed spi speed, which can use tick_delay to tuning spi clk timing. Signed-off-by: Mason Zhang <Mason.Zhang@xxxxxxxxxxxx> --- drivers/spi/spi-mt65xx.c | 11 ++++++++++- include/linux/platform_data/spi-mt65xx.h | 1 + 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 097625d7915e..b34fbc913fd6 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -42,8 +42,9 @@ #define SPI_CFG1_CS_IDLE_OFFSET 0 #define SPI_CFG1_PACKET_LOOP_OFFSET 8 #define SPI_CFG1_PACKET_LENGTH_OFFSET 16 -#define SPI_CFG1_GET_TICK_DLY_OFFSET 30 +#define SPI_CFG1_GET_TICK_DLY_OFFSET 29 +#define SPI_CFG1_GET_TICK_DLY_MASK 0xe0000000 #define SPI_CFG1_CS_IDLE_MASK 0xff #define SPI_CFG1_PACKET_LOOP_MASK 0xff00 #define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000 @@ -152,6 +153,7 @@ static const struct mtk_spi_compatible mt6893_compat = { */ static const struct mtk_chip_config mtk_default_chip_info = { .sample_sel = 0, + .tick_delay = 0, }; static const struct of_device_id mtk_spi_of_match[] = { @@ -275,6 +277,13 @@ static int mtk_spi_prepare_message(struct spi_master *master, writel(mdata->pad_sel[spi->chip_select], mdata->base + SPI_PAD_SEL_REG); + /* tick delay */ + reg_val = readl(mdata->base + SPI_CFG1_REG); + reg_val &= ~SPI_CFG1_GET_TICK_DLY_MASK; + reg_val |= ((chip_config->tick_delay & 0x7) + << SPI_CFG1_GET_TICK_DLY_OFFSET); + writel(reg_val, mdata->base + SPI_CFG1_REG); + return 0; } diff --git a/include/linux/platform_data/spi-mt65xx.h b/include/linux/platform_data/spi-mt65xx.h index 65fd5ffd257c..f0db674f07b8 100644 --- a/include/linux/platform_data/spi-mt65xx.h +++ b/include/linux/platform_data/spi-mt65xx.h @@ -12,5 +12,6 @@ /* Board specific platform_data */ struct mtk_chip_config { u32 sample_sel; + u32 tick_delay; }; #endif -- 2.18.0