On 17/05/21 02:14PM, Zhengxun Li wrote: > The octaflash is an xSPI compliant octal DTR flash. Add support > for using it in octal DTR mode. > > Try to verify the flash ID to check whether the flash memory in octal > DTR mode and SPI mode are correct. When reading ID in OCTAL DTR mode, > ID will appear in a repeated manner. ex: ID[0] = 0xc2, ID[1] = 0xc2, > ID[2] = 0x94, ID[3] = 0x94... Rearrange the order so that the ID can pass. > > The octaflash series can be divided into the following types: > > MX25 series : Serial NOR Flash. > MX66 series : Serial NOR Flash with stacked die.(Size larger than 1Gb) > LM/UM series : Up to 250MHz clock frequency with both DTR/STR operation. > LW/UW series : Support simultaneous Read-while-Write operation in multiple > bank architecture. Read-while-write feature which means read > data one bank while another bank is programing or erasing. > > MX25LM : 3.0V Octal I/O > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7841/MX25LM51245G,%203V,%20512Mb,%20v1.1.pdf > > MX25UM : 1.8V Octal I/O > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7525/MX25UM51245G%20Extreme%20Speed,%201.8V,%20512Mb,%20v1.0.pdf > > MX66LM : 3.0V Octal I/O with stacked die > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7929/MX66LM1G45G,%203V,%201Gb,%20v1.1.pdf > > MX66UM : 1.8V Octal I/O with stacked die > -https://www.mxic.com.tw/Lists/Datasheet/Attachments/7721/MX66UM1G45G,%201.8V,%201Gb,%20v1.1.pdf > > MX25LW : 3.0V Octal I/O with Read-while-Write > MX25UW : 1.8V Octal I/O with Read-while-Write > MX66LW : 3.0V Octal I/O with Read-while-Write and stack die > MX66UW : 1.8V Octal I/O with Read-while-Write and stack die > > About LW/UW series, please contact us freely if you have any > questions. For adding Octal NOR Flash IDs, we have validated > each Flash on plateform zynq-picozed. > > Signed-off-by: Zhengxun Li <zhengxunli@xxxxxxxxxxx> Reviewed-by: Pratyush Yadav <p.yadav@xxxxxx> -- Regards, Pratyush Yadav Texas Instruments Inc.