This series adds support for Octal DTR for Macronix flashes. The first set of patches is add Macronix octal dtr mode support and Macronix octaflash series support. The second add the Octal DTR mode support for host driver. Changes in v5: - Based on Pratyush patch[0], modify the length of the value written to the Octal DTR register (1 is changed to 2) and add check ID in SPI mode. [0]https://patchwork.ozlabs.org/project/linux-mtd/patch/20210506191829.8271-3-p.yadav@xxxxxx/ Changes in v4: - merge patch 2(support octaflash Id) to patch 1(support octal dtr) - add switching back to default mode(1-1-1) support if octal dtr is disabled - delete the duplicate code settings initialized by the Profile 1.0 table. (such as cmd_ext_type, rdsr_dummy, rdsr_addr_nbytes, etc.) - add a description about stacked die Changes in v3: - Add support for Macronix octaflash series. Changes in v2: - Define with a generic name to describe the maximum dummy cycles. - Compare the ID directly in the loop, no longer copy and execute memcmp(). - Add spi_mem_dtr_supports_op() to support dtr operation. Zhengxun Li (2): mtd: spi-nor: macronix: add support for Macronix octaflash spi: mxic: patch for octal DTR mode support Zhengxun Li (2): mtd: spi-nor: macronix: add support for Macronix octaflash spi: mxic: patch for octal DTR mode support drivers/mtd/spi-nor/macronix.c | 185 +++++++++++++++++++++++++++++++++++++++++ drivers/spi/spi-mxic.c | 41 ++++++--- 2 files changed, 215 insertions(+), 11 deletions(-) -- 1.9.1