[PATCH] spi: Fix spi device unregister flow

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When an SPI device is unregistered, the spi->controller->cleanup() is
called in the device's release callback. That's wrong for a couple of
reasons:

1. spi_dev_put() can be called before spi_add_device() is called. And
   it's spi_add_device() that calls spi_setup(). This will cause clean()
   to get called without the spi device ever being setup.

2. There's no guarantee that the controller's driver would be present by
   the time the spi device's release function gets called.

3. It also causes "sleeping in atomic context" stack dump[1] when device
   link deletion code does a put_device() on the spi device.

Fix these issues by simply moving the cleanup from the device release
callback to the actual spi_unregister_device() function.

[1] - https://lore.kernel.org/lkml/CAHp75Vc=FCGcUyS0v6fnxme2YJ+qD+Y-hQDQLa2JhWNON9VmsQ@xxxxxxxxxxxxxx/
Signed-off-by: Saravana Kannan <saravanak@xxxxxxxxxx>
---
 drivers/spi/spi.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index b08efe88ccd6..7d0d89172a1d 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -47,10 +47,6 @@ static void spidev_release(struct device *dev)
 {
 	struct spi_device	*spi = to_spi_device(dev);
 
-	/* spi controllers may cleanup for released devices */
-	if (spi->controller->cleanup)
-		spi->controller->cleanup(spi);
-
 	spi_controller_put(spi->controller);
 	kfree(spi->driver_override);
 	kfree(spi);
@@ -558,6 +554,12 @@ static int spi_dev_check(struct device *dev, void *data)
 	return 0;
 }
 
+static void spi_cleanup(struct spi_device *spi)
+{
+	if (spi->controller->cleanup)
+		spi->controller->cleanup(spi);
+}
+
 /**
  * spi_add_device - Add spi_device allocated with spi_alloc_device
  * @spi: spi_device to register
@@ -622,11 +624,13 @@ int spi_add_device(struct spi_device *spi)
 
 	/* Device may be bound to an active driver when this returns */
 	status = device_add(&spi->dev);
-	if (status < 0)
+	if (status < 0) {
 		dev_err(dev, "can't add %s, status %d\n",
 				dev_name(&spi->dev), status);
-	else
+		spi_cleanup(spi);
+	} else {
 		dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
+	}
 
 done:
 	mutex_unlock(&spi_add_lock);
@@ -713,6 +717,8 @@ void spi_unregister_device(struct spi_device *spi)
 	if (!spi)
 		return;
 
+	spi_cleanup(spi);
+
 	if (spi->dev.of_node) {
 		of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
 		of_node_put(spi->dev.of_node);
-- 
2.31.1.498.g6c1eba8ee3d-goog




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux