Add necessary macros and structure variables to support ICC BW voting from individual SE drivers. Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx> --- Changes in V2: - As per Bjorn's comment dropped enums for ICC paths, given the three paths individual members include/linux/qcom-geni-se.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h index dd46494..eaae16e 100644 --- a/include/linux/qcom-geni-se.h +++ b/include/linux/qcom-geni-se.h @@ -6,6 +6,8 @@ #ifndef _LINUX_QCOM_GENI_SE #define _LINUX_QCOM_GENI_SE +#include <linux/interconnect.h> + /* Transfer mode supported by GENI Serial Engines */ enum geni_se_xfer_mode { GENI_SE_INVALID, @@ -33,6 +35,15 @@ struct clk; * @clk: Handle to the core serial engine clock * @num_clk_levels: Number of valid clock levels in clk_perf_tbl * @clk_perf_tbl: Table of clock frequency input to serial engine clock + * @icc_path_geni_to_core: ICC path handle for geni to core + * @icc_path_cpu_to_geni: ICC path handle for cpu to geni + * @icc_path_geni_to_ddr: ICC path handle for geni to ddr + * @avg_bw_core: Average bus bandwidth value for QUP core 2x clock + * @peak_bw_core: Peak bus bandwidth value for QUP core 2x clock + * @avg_bw_cpu: Average bus bandwidth value for CPU + * @peak_bw_cpu: Peak bus bandwidth value for CPU + * @avg_bw_ddr: Average bus bandwidth value for DDR + * @peak_bw_ddr: Peak bus bandwidth value for DDR */ struct geni_se { void __iomem *base; @@ -41,6 +52,15 @@ struct geni_se { struct clk *clk; unsigned int num_clk_levels; unsigned long *clk_perf_tbl; + struct icc_path *icc_path_geni_to_core; + struct icc_path *icc_path_cpu_to_geni; + struct icc_path *icc_path_geni_to_ddr; + unsigned int avg_bw_core; + unsigned int peak_bw_core; + unsigned int avg_bw_cpu; + unsigned int peak_bw_cpu; + unsigned int avg_bw_ddr; + unsigned int peak_bw_ddr; }; /* Common SE registers */ @@ -229,6 +249,14 @@ struct geni_se { #define GENI_SE_VERSION_MINOR(ver) ((ver & HW_VER_MINOR_MASK) >> HW_VER_MINOR_SHFT) #define GENI_SE_VERSION_STEP(ver) (ver & HW_VER_STEP_MASK) +/* Core 2X clock frequency to BCM threshold mapping */ +#define CORE_2X_19_2_MHZ 960 +#define CORE_2X_50_MHZ 2500 +#define CORE_2X_100_MHZ 5000 +#define CORE_2X_150_MHZ 7500 +#define CORE_2X_200_MHZ 10000 +#define CORE_2X_236_MHZ 16383 + #if IS_ENABLED(CONFIG_QCOM_GENI_SE) u32 geni_se_get_qup_hw_version(struct geni_se *se); -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project