Re: [PATCH v8 1/2] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello!

On 03/08/2019 12:14 PM, Geert Uytterhoeven wrote:

>>> Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller.
>>>
>>> Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
>>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
>> [...]
>>> diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c
>>> new file mode 100644
>>> index 0000000..ea12017
>>> --- /dev/null
>>> +++ b/drivers/spi/spi-renesas-rpc.c
>>> @@ -0,0 +1,804 @@
>> [...]
>>> +static void rpc_spi_hw_init(struct rpc_spi *rpc)
>>> +{
>>> +     //
>>> +     // NOTE: The 0x260 are undocumented bits, but they must be set.
>>> +     //      RPC_PHYCNT_STRTIM is strobe timing adjustment bit,
>>> +     //      0x0 : the delay is biggest,
>>> +     //      0x1 : the delay is 2nd biggest,
>>> +     //      On H3 ES1.x, the value should be 0, while on others,
>>> +     //      the value should be 6.
>>> +     //
>>> +     regmap_write(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_CAL |
>>> +                               RPC_PHYCNT_STRTIM(6) | 0x260);
>>> +
>>> +     //
>>> +     // NOTE: The 0x1511144 are undocumented bits, but they must be set
>>> +     //       for RPC_PHYOFFSET1.
>>> +     //       The 0x31 are undocumented bits, but they must be set
>>> +     //       for RPC_PHYOFFSET2.
>>> +     //
>>> +     regmap_write(rpc->regmap, RPC_PHYOFFSET1, RPC_PHYOFFSET1_DDRTMG(3) |
>>> +                  0x1511144);
>>> +     regmap_write(rpc->regmap, RPC_PHYOFFSET2, 0x31 |
>>> +                  RPC_PHYOFFSET2_OCTTMG(4));
>>> +     regmap_write(rpc->regmap, RPC_SSLDR, RPC_SSLDR_SPNDL(7) |
>>> +                  RPC_SSLDR_SLNDL(7) | RPC_SSLDR_SCKDL(7));
>>> +     regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD | RPC_CMNCR_SFDE |
>>> +                  RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ |
>>> +                  RPC_CMNCR_BSZ(0));
>>> +}
>>
>>    We clearly need runtime PM get/put() calls around this code. Otherwise,
>> we're dependant on U-Boot leaving the clocks enabled...
> 
> Even that would be futile, as the common clock framework disables all
> unused clocks at late boot time.

   This code is executed during the probing time and it indeed works. The clocks seem
to be disabled somewhat later...

> Gr{oetje,eeting}s,
> 
>                         Geert

MBR, Sergei




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux