Hello! On 01/28/2019 09:49 AM, Mason Yang wrote: > Add a driver for Renesas R-Car Gen3 RPC-IF SPI controller. > > Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> [...] > diff --git a/drivers/spi/spi-renesas-rpc.c b/drivers/spi/spi-renesas-rpc.c > new file mode 100644 > index 0000000..ea12017 > --- /dev/null > +++ b/drivers/spi/spi-renesas-rpc.c > @@ -0,0 +1,804 @@ [...] > +static void rpc_spi_hw_init(struct rpc_spi *rpc) > +{ > + // > + // NOTE: The 0x260 are undocumented bits, but they must be set. > + // RPC_PHYCNT_STRTIM is strobe timing adjustment bit, > + // 0x0 : the delay is biggest, > + // 0x1 : the delay is 2nd biggest, > + // On H3 ES1.x, the value should be 0, while on others, > + // the value should be 6. > + // > + regmap_write(rpc->regmap, RPC_PHYCNT, RPC_PHYCNT_CAL | > + RPC_PHYCNT_STRTIM(6) | 0x260); > + > + // > + // NOTE: The 0x1511144 are undocumented bits, but they must be set > + // for RPC_PHYOFFSET1. > + // The 0x31 are undocumented bits, but they must be set > + // for RPC_PHYOFFSET2. > + // > + regmap_write(rpc->regmap, RPC_PHYOFFSET1, RPC_PHYOFFSET1_DDRTMG(3) | > + 0x1511144); > + regmap_write(rpc->regmap, RPC_PHYOFFSET2, 0x31 | > + RPC_PHYOFFSET2_OCTTMG(4)); > + regmap_write(rpc->regmap, RPC_SSLDR, RPC_SSLDR_SPNDL(7) | > + RPC_SSLDR_SLNDL(7) | RPC_SSLDR_SCKDL(7)); > + regmap_write(rpc->regmap, RPC_CMNCR, RPC_CMNCR_MD | RPC_CMNCR_SFDE | > + RPC_CMNCR_MOIIO_HIZ | RPC_CMNCR_IOFV_HIZ | > + RPC_CMNCR_BSZ(0)); > +} We clearly need runtime PM get/put() calls around this code. Otherwise, we're dependant on U-Boot leaving the clocks enabled... [...] MBR, Sergei