Patchwork housekeeping for: spi-devel-general

[patchwork-bot@xxxxxxxxxx]

Superseded with v2: [v1] spi: imx: Fix polarity switching for mx51-ecspi (2018-11-19)
  [1/5] spi: imx: add a device specific prepare_message callback
  [2/5] spi: imx: mx51-ecspi: Move some initialisation to prepare_message hook.
  [3/5] spi: imx: style fixes
  [4/5] spi: imx: rename config callback and add useful parameters
  [5/5] spi: imx: drop useless member speed_hz from driver data struct

Superseded with v2: [v1] add SPI driver support for mt7629 (2018-11-20)
  [1/2] spi: mediatek: Add bindings for mediatek MT7629 soc platform
  [2/2] spi: mediatek: add spi support for mt7629 IC

Superseded with v2: [v1] Add support for OLPC XO 1.75 Embedded Controller (2018-10-10)
  [01/15] power: supply: olpc_battery: correct the temperature units
  [02/15] Revert "platform/olpc: Make ec explicitly non-modular"
  [03/15] dt-bindings: olpc,xo1.75-ec: Add OLPC XO-1.75 EC bindings
  [04/15] Platform: OLPC: Remove an unused include
  [05/15] Platform: OLPC: Move OLPC config symbol out of x86 tree
  [06/15] Platform: OLPC: Add XO-1.75 EC driver
  [07/15] Platform: OLPC: Avoid a warning if the EC didn't register yet
  [08/15] Platform: OLPC: Move EC-specific functionality out from x86
  [09/15] Platform: OLPC: add a regulator for the DCON
  [10/15] dt-bindings: olpc_battery: Add XO-1.5 battery
  [11/15] x86, olpc: Use a correct version when making up a battery node
  [12/15] power: supply: olpc_battery: Use DT to get battery version
  [13/15] power: supply: olpc_battery: Move priv data to a struct
  [14/15] power: supply: olpc_battery: Avoid using platform_info
  [15/15] power: supply: olpc_battery: Add OLPC XO 1.75 support

Superseded with v6: [v1] spi: Add Macronix controller driver (2018-09-17)
  [1/2] spi: Add MXIC controller driver
  [2/2] dt-binding: spi: Document Macronix controller bindings

Superseded with v6: [v3] spi: Add Macronix controller driver (2018-09-28)
  [v3,1/2] spi: Add MXIC controller driver
  [v3,2/2] dt-bindings: spi: Document Macronix controller bindings

Superseded with v6: [v4] spi: Add Macronix controller driver (2018-10-08)
  [v4,1/2] spi: Add MXIC controller driver
  [v4,2/2] dt-bindings: spi: Document Macronix controller bindings

Superseded with v6: [v5] spi: Add Macronix controller driver (2018-10-15)
  [v5,1/2] spi: Add MXIC controller driver
  [v5,2/2] dt-binding: spi: Document Macronix controller bindings

Superseded with v2: [v1] Add QSPI flash support to iwg23s (2018-11-01)
  [1/4] spi: rspi: Add r8a77470 to the compatible list
  [2/4] mtd: spi-nor: Add support for is25lp016d
  [3/4] ARM: dts: r8a77470: Add QSPI support
  [4/4] ARM: dts: iwg23s-sbc: Add QSPI flash support

Superseded with v5: [v2] spi: spi-mem: Add driver for NXP FlexSPI controller (2018-09-17)
  [v2,1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  [v2,2/5] dt-bindings: spi: add binding file for NXP FlexSPI controller
  [v2,3/5] arm64: dts: lx2160a: add FlexSPI node property
  [v2,4/5] arm64: defconfig: enable NXP FlexSPI driver
  [v2,5/5] MAINTAINERS: add maintainers for the NXP FlexSPI driver

Superseded with v5: [v3] spi: spi-mem: Add driver for NXP FlexSPI controller (2018-09-21)
  [v3,1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  [v3,2/5] dt-bindings: spi: add binding file for NXP FlexSPI controller
  [v3,3/5] arm64: dts: lx2160a: add FlexSPI node property
  [v3,4/5] arm64: defconfig: enable NXP FlexSPI driver
  [v3,5/5] MAINTAINERS: add maintainers for the NXP FlexSPI driver

Superseded with v5: [v4] spi: spi-mem: Add driver for NXP FlexSPI controller (2018-10-11)
  [v4,1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  [v4,2/5] dt-bindings: spi: add binding file for NXP FlexSPI controller
  [v4,3/5] arm64: dts: lx2160a: add FlexSPI node property
  [v4,4/5] arm64: defconfig: enable NXP FlexSPI driver
  [5/5] MAINTAINERS: add maintainers for the NXP FlexSPI driver

Superseded with v5: [v2] Add Mediatek SPI slave driver (2018-09-04)
  [v2,1/3] spis: mediatek: add bindings for Mediatek MT2712 soc platform
  [v2,2/3] spis: mediatek: add spi slave for Mediatek MT2712
  [v2,3/3] arm64: dts: Add spi slave dts

Superseded with v5: [v3] Add Mediatek SPI slave driver (2018-09-17)
  [v3,1/3] spis: mediatek: add bindings for Mediatek MT2712 soc platform
  [v3,2/3] spis: mediatek: add spi slave for Mediatek MT2712
  [v3,3/3] arm64: dts: Add spi slave dts

Superseded with v5: [v4] Add Mediatek SPI slave driver (2018-09-25)
  [v4,1/3] spi: mediatek: add bindings for Mediatek MT2712 soc platform
  [v4,2/3] spi: mediatek: add spi slave for Mediatek MT2712
  [v4,3/3] arm64: dts: Add spi slave dts

Superseded with v6: [v4] Port the FSL QSPI driver to the SPI framework (2018-11-07)
  [v4,01/10] spi: Add a driver for the Freescale/NXP QuadSPI controller
  [v4,02/10] dt-bindings: spi: Move the bindings for the FSL QSPI driver
  [v4,03/10] dt-bindings: spi: Adjust the bindings for the FSL QSPI driver
  [v4,04/10] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties
  [v4,05/10] arm64: dts: Reflect change of FSL QSPI driver and remove unused properties
  [v4,06/10] ARM: defconfig: Use the new FSL QSPI driver under the SPI framework
  [v4,07/10] mtd: fsl-quadspi: Remove the driver as it was replaced by spi-fsl-qspi.c
  [v4,08/10] ARM: dts: ls1021a: Remove fsl,qspi-has-second-chip as it is not used
  [v4,09/10] ARM64: dts: ls1046a: Remove fsl,qspi-has-second-chip as it is not used
  [v4,10/10] MAINTAINERS: Move the Freescale QSPI driver to the SPI framework

Superseded with v6: [v5] Port the FSL QSPI driver to the SPI framework (2018-11-13)
  [v5,1/9] ARM: dts: Reflect change of FSL QSPI driver and remove unused properties
  [v5,2/9] arm64: dts: Reflect change of FSL QSPI driver and remove unused properties
  [v5,3/9] spi: Add a driver for the Freescale/NXP QuadSPI controller
  [v5,4/9] dt-bindings: spi: Move the bindings for the FSL QSPI driver
  [v5,5/9] dt-bindings: spi: Adjust the bindings for the FSL QSPI driver
  [v5,6/9] mtd: fsl-quadspi: Remove the driver as it was replaced by spi-fsl-qspi.c
  [v5,7/9] ARM: dts: ls1021a: Remove fsl,qspi-has-second-chip as it is not used
  [v5,8/9] ARM64: dts: ls1046a: Remove fsl,qspi-has-second-chip as it is not used
  [v5,9/9] MAINTAINERS: Move the Freescale QSPI driver to the SPI framework

Superseded with v3: [v1] Add support for ARRI FPGA configuration (2018-11-05)
  [1/3] usb: misc: add driver for FT232H based FPGA configuration devices
  [2/3] spi: add FTDI MPSSE SPI controller driver
  [3/3] fpga: Add fpga manager driver for ARRI Altera FPP

Superseded with v3: [v2] Add support for ARRI FPGA configuration (2018-11-20)
  [v2,1/3] usb: misc: add driver for FT232H based FPGA configuration devices
  [v2,2/3] spi: add FTDI MPSSE SPI controller driver
  [v2,3/3] fpga: Add fpga manager driver for ARRI Altera FPP

Superseded with v2: [v1] Make SPI work on DT MMP2 (2018-09-10)
  [1/5] dt-bindings: spi/spi-pxa2xx: add PXA2xx SSP SPI Controller
  [2/5] PCI: provide pci_match_id() with CONFIG_PCI=n
  [3/5] spi: pxa2xx: use an enum for type
  [4/5] spi: pxa2xx: add devicetree support
  [5/5] DT: marvell,mmp2: add SSP1 and SSP3

Superseded with v4: [v3] spi: add support for octo mode (2018-10-23)
  [v3,1/7] spi: add support for octo mode I/O data transfer
  [v3,2/7] spi: spi-mem: add support for octo mode I/O data transfer
  [v3,3/7] mtd: spi-nor: add opcodes for octo Read/Write commands
  [v3,4/7] mtd: spi-nor: add octo read flag for flash mt35xu512aba
  [v3,5/7] mtd: m25p80: add support of octo mode I/O transfer
  [v3,6/7] spi: nxp-fspi: add octo mode flag bit for octal support
  [v3,7/7] arm64: dts: lx2160a: update fspi node

Superseded with v2: [v1] device tree spidev solution - driver_override for SPI (2018-09-18)
  [1/2] spi: Add driver_override SPI device attribute
  [2/2] spi: spidev: Fix OF tree warning logic

Superseded with v3: [v2] spi: spi-mem: Add a direct mapping API (2018-10-30)
  [v2,1/7] spi: spi-mem: Add missing word in the SPI_MEM_DATA_OUT description
  [v2,2/7] spi: spi-mem: Add SPI_MEM_NO_DATA to the spi_mem_data_dir enum
  [v2,3/7] spi: spi-mem: Split spi_mem_exec_op() code
  [v2,4/7] spi: spi-mem: Add a new API to support direct mapping
  [v2,5/7] mtd: devices: m25p80: Use the spi-mem dirmap API
  [v2,6/7] mtd: spinand: Use the spi-mem dirmap API
  [v2,7/7] spi: mxic: Add support for direct mapping

Superseded with v3: [v1] mtd: spi-nor: add entry for mt35xu512aba flash (2018-09-19)
  [RESEND,1/2] mtd: spi-nor: add macros related to MICRON flash
  [RESEND,2/2] mtd: spi-nor: add entry for mt35xu512aba flash

Superseded with v3: [v2] mtd: spi-nor: add entry for mt35xu512aba flash (2018-10-11)
  [v2,1/2] mtd: spi-nor: add macros related to MICRON flash
  [v2,2/2] mtd: spi-nor: add entry for mt35xu512aba flash


-- 
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/pwbot