Hi Ulrich, On Mon, Jul 18, 2016 at 10:57 AM, Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx> wrote: > Required for the CS signal to actually be visible to the device. > > Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx> Thanks, I can confirm this indeed makes cs-gpios work with MSIOF on Koelsch, hence Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> > --- > drivers/spi/spi-sh-msiof.c | 25 +++++++++++++++++++++++-- > 1 file changed, 23 insertions(+), 2 deletions(-) > > diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c > index a7934ab..d4b5772 100644 > --- a/drivers/spi/spi-sh-msiof.c > +++ b/drivers/spi/spi-sh-msiof.c > @@ -536,15 +536,35 @@ static int sh_msiof_spi_setup(struct spi_device *spi) Is there any specific reason you don't do this in .probe(), like spi-efm32 does? > !!(spi->mode & SPI_LSB_FIRST), > !!(spi->mode & SPI_CS_HIGH)); > > - if (spi->cs_gpio >= 0) > - gpio_set_value(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); > + if (spi->cs_gpio >= 0 && !spi_get_ctldata(spi)) { > + int status = gpio_request(spi->cs_gpio, dev_name(&spi->dev)); devm_gpio_request()... > + > + if (status) > + return status; > > + status = gpio_direction_output(spi->cs_gpio, > + !(spi->mode & SPI_CS_HIGH)); > + if (status) { > + gpio_free(spi->cs_gpio); > + return status; > + } ... or even better, devm_gpio_request_one(), as it allows configuring direction and initial level in one go. > + > + spi_set_ctldata(spi, (void *)spi->cs_gpio); > + } Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html