IO functions prototypes may have different argument qualifiers on different architectures. This patch cast the assignment of the function, to match the one defined at iomap.h. Fixes: 99082eab63449f9d spi/xilinx: Remove iowrite/ioread wrappers Reported-by: kbuild test robot <fengguang.wu@xxxxxxxxx> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx> --- drivers/spi/spi-xilinx.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index 0e8962c..418e730 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -91,7 +91,7 @@ struct xilinx_spi { u8 bytes_per_word; int buffer_size; /* buffer size in words */ u32 cs_inactive; /* Level of the CS pins when inactive*/ - unsigned int (*read_fn)(void __iomem *); + u32 (*read_fn)(void __iomem *); void (*write_fn)(u32, void __iomem *); }; @@ -378,15 +378,15 @@ static int xilinx_spi_probe(struct platform_device *pdev) * Setup little endian helper functions first and try to use them * and check if bit was correctly setup or not. */ - xspi->read_fn = ioread32; - xspi->write_fn = iowrite32; + xspi->read_fn = (u32 (*)(void __iomem *)) ioread32; + xspi->write_fn = (void (*)(u32, void __iomem *)) iowrite32; xspi->write_fn(XSPI_CR_LOOP, xspi->regs + XSPI_CR_OFFSET); tmp = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET); tmp &= XSPI_CR_LOOP; if (tmp != XSPI_CR_LOOP) { - xspi->read_fn = ioread32be; - xspi->write_fn = iowrite32be; + xspi->read_fn = (u32 (*)(void __iomem *)) ioread32be; + xspi->write_fn = (void (*)(u32, void __iomem *)) iowrite32be; } master->bits_per_word_mask = SPI_BPW_MASK(bits_per_word); -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html