This is a new driver which controls the SPI component of ST's Synchronous Serial Controller (SSC). v2 => v3: - Fixes Patrice's review comments - Removed COMPILE_TEST (at least until Will Deacon's patch lands) v1 => v2: - New, more specific CONFIG symbol - Increased Runtime PM functionality - Make use of new Pinctrl API - Convert from SPI Bitbang => Transfer One - Omit functionality which Core can handle - Removal of *cough* debug code Lee Jones (4): spi: Add new driver for STMicroelectronics' SPI Controller spi: st: Provide Device Tree binding documentation ARM: sti: Provide DT nodes for SSC[0..4] ARM: sti: Provide DT nodes for SBC SSC[0..2] Documentation/devicetree/bindings/spi/spi-st.txt | 40 ++ arch/arm/boot/dts/stih407.dtsi | 85 ++++ drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-st-ssc4.c | 509 +++++++++++++++++++++++ 5 files changed, 642 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-st.txt create mode 100644 drivers/spi/spi-st-ssc4.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html