Re: [PATCH] spi: s3c64xx: add support for exynos7 SPI controller

[Padma Venkat <padma.kvr@xxxxxxxxx>]

Hi Mark,

On 11/7/14, Mark Brown <broonie@xxxxxxxxxx> wrote:
> On Fri, Nov 07, 2014 at 02:01:57PM +0530, Padma Venkat wrote:
>
>> CS can also be controlled automatically by setting AUTO_N_MANUAL to 1
>> in CS_CFG. When it is auto CS automatically toggles between packet to
>> packet. NCS_TIME_COUNT in CS_CFG controls the inactive period. The
>> driver by default uses manual mode. But on exynos7 the manual mode is
>> removed.
>
> OK, but what's a packet here?

Packet is either 1 byte or 4 bytes size depends on width of the SPI channel.

>
>> I tested the driver with wm5110 codec.
>
> Did you try firmware downloads or something else that generates multiple
> transfers in a message?  Normal register writes will use a single
> transfer so I'd expect them to just work.
>

OK. I don't have provision to test on this board. I will try to test
on older boards by disabling manual mode.

Thanks
padma
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html