As new locomo driver supports SPARSE_IRQ, don't preallocate NR_IRQS space for it on poodle. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx> --- arch/arm/mach-pxa/include/mach/poodle.h | 2 +- arch/arm/mach-pxa/poodle.c | 8 ++++++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index e8eb51e..105410a 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -91,7 +91,7 @@ #define POODLE_GPIO_MUTE_L (POODLE_LOCOMO_GPIO_BASE + 10) #define POODLE_GPIO_MUTE_R (POODLE_LOCOMO_GPIO_BASE + 11) -#define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */ +#define POODLE_NR_IRQS IRQ_BOARD_START extern struct platform_device poodle_locomo_device; diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 3041d83..97eced9 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -181,14 +181,18 @@ static struct locomo_platform_data locomo_info = { .gpio_data = { .gpio_base = POODLE_LOCOMO_GPIO_BASE, }, - .bl_data = { + .lcd_data = { .comadj = 118, .gpio_lcd_vsha_on = POODLE_GPIO_LCD_VSHA_ON, .gpio_lcd_vshd_on = POODLE_GPIO_LCD_VSHD_ON, .gpio_lcd_vee_on = POODLE_GPIO_LCD_VEE_ON, .gpio_lcd_mod = POODLE_GPIO_LCD_MOD, + }, + .bl_data = { .gpio_fl_vr = POODLE_GPIO_FL_VR, }, + .gpio_amp1_on = -1, + .gpio_amp2_on = -1, }; struct platform_device poodle_locomo_device = { @@ -453,7 +457,7 @@ static void __init poodle_init(void) platform_scoop_config = &poodle_pcmcia_config; if (sharpsl_param.comadj != -1) - locomo_info.bl_data.comadj = sharpsl_param.comadj; + locomo_info.lcd_data.comadj = sharpsl_param.comadj; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) -- 2.1.1 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html