Because the minimum divisor in rk3x's spi controller is 2, if spi_clk is less than 2 * sclk_out, we can't get the right divisor. So we must set spi_clk again to match slave request. Signed-off-by: Addy Ke <addy.ke@xxxxxxxxxxxxxx> --- drivers/spi/spi-rockchip.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index f96ea8a..3044c6c 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -145,6 +145,9 @@ #define RXBUSY (1 << 0) #define TXBUSY (1 << 1) +/* sclk_out: spi master internal logic in rk3x can support 50Mhz */ +#define MAX_SCLK_OUT 50000000 + enum rockchip_ssi_type { SSI_MOTO_SPI = 0, SSI_TI_SSP, @@ -496,6 +499,15 @@ static void rockchip_spi_config(struct rockchip_spi *rs) dmacr |= RF_DMA_EN; } + if (WARN_ON(rs->speed > MAX_SCLK_OUT)) + rs->speed = MAX_SCLK_OUT; + + /* the minimum divsor is 2 */ + if (rs->max_freq < 2 * rs->speed) { + clk_set_rate(rs->spiclk, 2 * rs->speed); + rs->max_freq = clk_get_rate(rs->spiclk); + } + /* div doesn't support odd number */ div = max_t(u32, rs->max_freq / rs->speed, 1); div = (div + 1) & 0xfffe; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html