On Wed, Aug 27, 2014 at 11:12:08AM +0530, sanjeev sharma wrote: > On Sat, Aug 23, 2014 at 5:43 AM, Robin Gong <b38343@xxxxxxxxxxxxx> wrote: > > > + /* > > + * Configure the DMA register: setup the watermark > > + * and enable DMA request. > > + */ > > + if (spi_imx->dma_is_inited) { > > + dma = readl(spi_imx->base + MX51_ECSPI_DMA); > > + > > + spi_imx->tx_wml = spi_imx_get_fifosize(spi_imx) / 2; > > + spi_imx->rx_wml = spi_imx_get_fifosize(spi_imx) / 2; > > + spi_imx->rxt_wml = spi_imx_get_fifosize(spi_imx) / 2; > > + rx_wml_cfg = spi_imx->rx_wml << > > MX51_ECSPI_DMA_RX_WML_OFFSET; > > + tx_wml_cfg = spi_imx->tx_wml << > > MX51_ECSPI_DMA_TX_WML_OFFSET; > > + rxt_wml_cfg = spi_imx->rxt_wml << > > MX51_ECSPI_DMA_RXT_WML_OFFSET; > > + dma = (dma & ~MX51_ECSPI_DMA_TX_WML_MASK > > + & ~MX51_ECSPI_DMA_RX_WML_MASK > > + & ~MX51_ECSPI_DMA_RXT_WML_MASK) > > + | rx_wml_cfg | tx_wml_cfg | rxt_wml_cfg > > + |(1 << MX51_ECSPI_DMA_TEDEN_OFFSET) > > + |(1 << MX51_ECSPI_DMA_RXDEN_OFFSET) > > + |(1 << MX51_ECSPI_DMA_RXTDEN_OFFSET); > > + > > > > IMO, we should have an seperate function for dmactrl,rx_threshold & > tx_threshold for better visiblity. > > I understood your concern, but I don't want to create one function only for setting some bit fields of the register. > > > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > > -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html