Re: [PATCH v2 03/10] mtd: spi-nor: add DDR quad read support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday, April 28, 2014 at 05:53:40 AM, Huang Shijie wrote:
> This patch adds the DDR quad read support by the following:
> 
>   [1] add SPI_NOR_DDR_QUAD read mode.
> 
>   [2] add DDR Quad read opcodes:
>        SPINOR_OP_READ_1_4_4_D / SPINOR_OP_READ4_1_4_4_D
> 
>   [3] add set_ddr_quad_mode() to initialize for the DDR quad read.
>       Currently it only works for Spansion NOR.
> 
>   [3] about the dummy cycles.
>       We set the dummy with 8 for DDR quad read by default.
>       The m25p80.c can not support the DDR quad read, but the SPI NOR
> controller can set the dummy value in its child DT node, and the SPI NOR
> framework can parse it out.
> 
> Test this patch for Spansion s25fl128s NOR flash.
> 
> Signed-off-by: Huang Shijie <b32955@xxxxxxxxxxxxx>

Acked-by: Marek Vasut <marex@xxxxxxx>

Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux