Howdy,
i know its already fixed :) but say my little penny:
did you run it as root? does speechd-up require root?
if it does i see similar issues while my development in fenrir using
speech-dispatcher. running spd-conf as root and user and select explicit
pulseaudio as output solves that issues (if it is the same problem).
running speech-dispatcher via pulse on root does also require some pulse
setup to stream the "root" sound to the normal user.
i create a script that would do that.
https://raw.githubusercontent.com/chrys87/fenrir/master/tools/configure_pulse.sh
not sure if that makes sense for your issue. i just see this here on
many fenrir setups (using the speech-dispatcher driver).
cheers chrys
Am 15.08.2017 um 09:33 schrieb Okash Khawaja:
Hi,
Changing from pulse to alsa worked. Thanks all very much for help!
Still wonder why spd-say can do spd_open while speechd-up fails. May be
something check later.
Okash
On 15 Aug 2017 7:49 am, "Okash Khawaja" <okash.khawaja@xxxxxxxxx> wrote:
Okay I'll give it a go.
Thanks ,
Okash
On 14 Aug 2017 8:03 pm, "John Covici" <covici@xxxxxxxxxxxxxx> wrote:
Well, my setup was speech-dispatcher as a system rather than a user
service and pulse audio was not involved -- see if that combination
works for you.
On Mon, 14 Aug 2017 13:40:17 -0400,
Okash Khawaja wrote:
[1 <text/plain; UTF-8 (7bit)>]
[2 <text/html; UTF-8 (quoted-printable)>]
Hi,
Speech dispatcher is installed per user under /usr /local /... So is
speechd-up. Yes I'm using pulse audio.
Thanks,
Okash
On 14 Aug 2017 9:28 am, "John Covici" <covici@xxxxxxxxxxxxxx> wrote:
Is speech dispatcher system wide or for each user? Also, are you
using pulse audio?
On Mon, 14 Aug 2017 03:00:05 -0400,
Okash Khawaja wrote:
>
> [1 <text/plain; UTF-8 (7bit)>]
> [2 <text/html; UTF-8 (quoted-printable)>]
> Hi,
>
> Sorry about the delay.
>
> > So you can start speechd-up in the GUI and it will work?
> > But if you start it in the text console, it won't?
> Exactly
>
> spd-say works from text console, as does festival and espeak.
>
> Thanks,
> Okash
>
> On 13 Aug 2017 7:00 pm, "John Covici" <covici@xxxxxxxxxxxxxx> wrote:
>
> I wonder if its an audio problem. In a text console if you have
> espeak installed, does spdsay do anything?
>
> On Sun, 13 Aug 2017 13:17:16 -0400,
> Chris Brannon wrote:
> >
> > Okash Khawaja <okash.khawaja@xxxxxxxxx> writes:
> >
> > > Thanks that worked! But still no sound when run from text
console. Works fine from inside GUI.
> >
> > So you can start speechd-up in the GUI and it will work?
> > But if you start it in the text console, it won't?
> > Does spd-say work from a text console at all?
> >
> > -- Chris
>
> --
> Your life is like a penny. You're going to lose it. The question is:
> How do
> you spend it?
>
> John Covici
> covici@xxxxxxxxxxxxxx
>
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici
covici@xxxxxxxxxxxxxx
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici
covici@xxxxxxxxxxxxxx
_______________________________________________
Speakup mailing list
Speakup@xxxxxxxxxxxxxxxxx
http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup
_______________________________________________
Speakup mailing list
Speakup@xxxxxxxxxxxxxxxxx
http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup
