Hi Tony, I am wanting to get debian squeeze as well to use hardware speech. Where do i get squeeze from? i can't see it on the debian website (there seems to be no archive of old releases..) Thanks, Ryan -----Original Message----- From: Tony Baechler Sent: Tuesday, May 14, 2013 10:10 AM To: Speakup is a screen review system for Linux. Subject: Re: Slack 13.37 and 14.0 -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Since no one answered, I'll try my luck. I don't use Slackware and haven't in a very long time. If you're using hardware speech, Slack probably ships a newer kernel after 2.6.37 with broken serial support. The only two options are to use an older kernel or software speech. I don't think Slackware supports software speech, but Debian does. If you're running 32-bit, you might run into problems with big drives regardless of the kernel. I would recommend installing 64-bit Debian Squeeze if your system can run 64-bit and upgrade to Wheezy from there. That still lets you use the older kernel with hardware speech while giving you the newer packages. If you can use software speech, of course just installing Debian Wheezy directly is the better option. I've ran both Debian Squeeze with the 2.6.32 kernel and Wheezy with the 3.2 kernel and several 3 TB drives in a RAID array with no problems. As I'm sure you know, you probably don't want to use a 3 TB drive for boot. I have a separate 1 TB RAID array for my boot drive and I've had no problems. In reading your message again, I have a question. What happens with Debian if you use the standard Speakup keys to change your rate and pitch? I use a DECtalk Express here and I've never had that problem. In fact, I worked on fixing the driver and William incorporated my fixes with his own into the official Speakup module, so you should have a very good experience. Someone else has reported random rate and pitch drops, but he's using a DECtalk USB. I'm assuming you tried either the speakupconf script in the speakup-tools package or added lines to /etc/rc.local to set your rate and pitch, right? If the standard Speakup keys aren't working, you might have a keyboard issue or there might be a bug in D-I. Did you actually get Debian installed or is the problem you're having with the install CD? On 5/13/2013 10:06 AM, Mitchell D. Lynn wrote: > New to this list and hoping you all can help with this problem. I am > having issues with the last two versions of Slackware and getting > Speakup at install time. I have used Slackware back to version 7.0 with > no issues. > > For some reason, I can't get Speakup to load on either of these > releases. Using DEC Talk Express. Tried speakup.s, huge.s and hugesmp.s > since the latter two appear to have Speakup as well. > > I desperately need to get to a version that supports 3TB hard drives. > Considered switching to Debian, but ran into a Speakup issue there > too. Seems to be stuck at a default rate, and it won't let me change it > for session or otherwise. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (MingW32) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQIcBAEBCAAGBQJRkf+AAAoJEPrAuJWnLe0y3mkP/jOlQMS8S1fYURTGZEaNDeqr 1F81Q8rC3f5lNHNItK10z4ix4PpQvQmVnZKmi6LjoV7GScYPzF3cqyHGbSmXHE3p 4igWGCTfWNUTqe4Ucfpc1WX+xz2PY+9o6lWtDh3u9HlyrfHzwJva2KJZVk4HxXzJ dPXpTOIbBBS23XtpmocArPeIiT3Is6KVs5YUeKXkfs1c5Hqe0vg35X7kFuDxOX0U 1J3tqInPJsd/AK6Q7b8ergji2bGYon7fPRQQGh2u4Ozwq74M1Eo8Y/56sWk/DbHG l1u20E1anQp/ZgXJgc6PCjhLvevfA1UjOrrsW+VJbU6Op2xdQdA93RgBKOMMJyCk 5eBjZYcnZJN2YdH9KfUDY5kFClZ+fdw24IudkLSbqPz5S9oAc6c3yLNc2+ibYrPr it7CQ4DN1a2dqbWnummi84FTfuJ49cD3hvj2if0CnVKmwOLaE1d6xBsgGqRH0Wyf sr8wCjomE7oarZr3IvIWlx8AAlT/HDgISBUZYcH2NTJWSv0YlSZ1LS1alLBbLyIk 5568ZwxAue0BV4L6w3nAdlE6a8y1iHLTGQ0Y+NdnSVhiCVTT5PHYpNSkjgvXKkts PDZQEH/cFiTFW5WZql9GGqnKD1QgiIMutG3BlcjGXraqVDo129lX8+xrqH0DuQMI A6yc1+5LqKWOYYaYjC1o =T8TQ -----END PGP SIGNATURE----- _______________________________________________ Speakup mailing list Speakup at linux-speakup.org http://linux-speakup.org/cgi-bin/mailman/listinfo/speakup
