ip is handed out by openvpn from your server. If you want the same ip every time then set that up on openvpn to do that, see the static key mini howto on the subject. You should not need to use ifconfig on the client side to set ips on tunnel let openvpn pull the necessary options from the server. I use a routed vpn all the time and allways get the same ip from my server vpn ip that is. Regards, Kerry. ----- Original Message ----- From: "Tyler Littlefield" <tyler@xxxxxxxxxxxxx> To: "Speakup is a screen review system for Linux." <speakup at braille.uwo.ca> Sent: Friday, May 15, 2009 11:35 AM Subject: Re: openvpn configuration > It's fine. kids have exploits they run on the servers, but I'm not that > stupid. vpn is a lot more um, quiet, so I doubt they'll care as much over > the kids running exploits when they want to log to facebook. Not like I'm > looking at porn, just want to be able to do research. Anything with phpbb > is blocked, and I'm frequently reading articles. > When I try to set up tun, I need to use ifconfig to set up the tunnel; I > won't always have the same IP, though. > > > Thanks, > Tyler Littlefield > Web: tysdomain.com > email: tyler at tysdomain.com > My programs don't have bugs, they're called randomly added features. > > ----- Original Message ----- > From: "Kerry Hoath" <kerry at gotss.net> > To: "Speakup is a screen review system for Linux." > <speakup at braille.uwo.ca> > Sent: Thursday, May 14, 2009 9:22 PM > Subject: Re: openvpn configuration > > >> Firstly: >> understand the difference between tun and tap. >> You must use the *same* on both ends, tun for routed vpn, tap for >> bridged. >> >> decide whether you want routed or bridged and set up accordingly. >> Info on openvpn.net on which is bbest, routed is more scalable and there >> are tricks to hand out a default gateway on a bridged setup. >> >> these tricks may or may not work with Windows openvpn client see faq >> files. >> >> I'd set up dev tun on both ends and make sure you can see the other end >> of your tunnel. >> Best to make connectivity work before you mess with default routes etc. >> >> Is it worth noting here that you are probably violating policy by >> punching holes through a firewall? >> be aware in case admin comes down on you. >> >> Regards, Kerry. >> >> >> >> ----- Original Message ----- >> From: "Tyler Littlefield" <tyler at tysdomain.com> >> To: "Speakup is a screen review system for Linux." >> <speakup at braille.uwo.ca> >> Sent: Friday, May 15, 2009 3:08 AM >> Subject: openvpn configuration >> >> >>> Hello list, >>> I'm currently trying to get openvpn going. I have the port open, but >>> it's not letting me forward all traffic through, for some reason. Any >>> ideas? I've provided my configs below >>> #server: >>> dev tun >>> secret static.key >>> keepalive 10 60 >>> ping-timer-rem >>> persist-tun >>> persist-key >>> user nobody >>> group nobody >>> daemon >>> plugin /usr/share/openvpn/plugin/lib/openvpn-auth-pam.so login >>> push "redirect-gateway def1" >>> #client: >>> dev tap >>> remote tds-solutions.net >>> secret C:/static.key >>> keepalive 10 60 >>> ping-timer-rem >>> persist-tun >>> push "redirect-gateway def1" >>> resolv-retry infinite >>> nobind >>> proto udp >>> I want to be able to connect from multiple sources, so I used dev tap. >>> >>> Thanks, >>> Tyler Littlefield >>> Web: tysdomain.com >>> email: tyler at tysdomain.com >>> My programs don't have bugs, they're called randomly added features. >>> _______________________________________________ >>> Speakup mailing list >>> Speakup at braille.uwo.ca >>> http://speech.braille.uwo.ca/mailman/listinfo/speakup >>> >> >> _______________________________________________ >> Speakup mailing list >> Speakup at braille.uwo.ca >> http://speech.braille.uwo.ca/mailman/listinfo/speakup > > _______________________________________________ > Speakup mailing list > Speakup at braille.uwo.ca > http://speech.braille.uwo.ca/mailman/listinfo/speakup >
