Framebuffer Support Missing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Try modprobe uvesafb. I don't know if Debian uses that yet, but it's
pretty awesome. The best way to do it is modprobe uvesafb mode=your
native resolution (e.g. 1280x1024):32

Garrett

Chuck Hallenbeck wrote:
> Hi Steve,
> 
> On Thu, Oct 23, 2008 at 11:18:57PM -0700, Steve Holmes wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: RIPEMD160
>>
>> Well, I need to update my post some.  I looked at the linux-image
>> package and further at /lib/modules/2.6.26.... directory and I do
>> actually find a couple modules who start with 'fb' in the video
>> subdirectory.  But still no /dev/fb device.  If this kernel was
>> prebuilt with the options as shown in the related config file in
>> /boot, then I would expect the kernel to include framebuffer support.
>> If that is the case, then how does one get the framebuffer support to
>> be active so the device exists.  Do I have to mess around with udev
>> some how?
>>
> 
> No, you don't have to mess with the udev configuration. Frame buffers
> are activated in your initramfs by default. Are you certain you are
> using an initrd? It is at that point that your devices are detected,
> acpi is begun, modules for ide, sata, and usb are begun, along with
> frame buffers by default. It looks to me like you are not actually
> executing an initial ram FS. 
> 
> Chuck
> 
> 
> 
> 
> ------------------------------------------------------------------------
> 
> 
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com 
> Version: 8.0.175 / Virus Database: 270.8.2/1741 - Release Date: 10/23/2008 7:54 AM
> 

-- 
Garrett Klein
Visit me and my girlfriend's blog at http://garrettk17.dyndns.org



[Index of Archives]     [Linux for the Blind]     [Fedora Discussioin]     [Linux Kernel]     [Yosemite News]     [Big List of Linux Books]
  Powered by Linux